Overlay, Cover on the original emblem. Material: High Quality ABS Plastic. These Are Made To Overlay Your Factory Emblems, easy installment. Weather Resistant, ABS will NOT oxidize, rust or stain. Specifically made for Automotive use. Brand New, unscratched, sealed and PERFECT!! Emblems add a customized feel to your vehicle. Enhances the appearance of your vehicle’s exterior. 2007 – 2013 TUNDRA 4×4 I-Force 5.7L V8 SR5. 5.7L V8 (Fender) 2. SR5 (Side door) 2. Find location determine the exact location of the trims and calibrated position, before remove the tape protective film on the products. Clean surface clean the surface of Installation areas to ensure that it’s clean and no oil, grease and wax and so on. Paste products remove protective film on the products, place the product on the exact position accurately and carefully, press firmly to ensure good adhesion. NOTE:Don’t expose it to the larger dust within 24 hours and no washing within 24 hours, so it can be the best bond strength. Suggestions:Using lighter or hot hair dryer to slightly heat the adhesive tape on the products to Increase the stickiness. (All adhesive tapes affected by weather’s temperature).