PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020913
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Bolt ; Pocket Rivet
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028431
PSI Auto Restyling OE Style Fender Flares. PSI Auto Restyling OE Style Fender Flares Provide an Subtle Complement to Your Vehicle’s Overall Styling. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 2.5″ Rear 2.5″. Additional Tire Coverage: Front 1.0″ Rear 1.0″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8000913B
- Height of Flares: Front 2.5\
- Additional Tire Coverage: Front: 1.0\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: OE
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028370
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8030913B
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028318
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030913
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028240
This Product Is Designed To Fit The Following Vehicles. 5VZ-FE 3.4 Litre V6. Cold Air Intake Snorkel. UV Resistance ABS Plastic. For Maximum Strength and Longevity In Harsh. Minor Drilling / Cutting Required For Mounting. Fit 3.4L V6 Engine Model Only. Will Not Fit 4 Cylinder Model. The item “Cold Air Intake Snorkel Kit For Toyota 95-04 Tacoma 96-02 4Runner 3.4L V6 New” is in sale since Monday, January 25, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “blue_veg” and is located in Baldwin Park, California. This item can be shipped to United States.
- Superseded Part Number: 5VZ-FE 3.4 Litre V6 Engine Model
- Diameter: 3in.
- Material: Plastic
- Type: Snorkel Kit
- Features: Cold-Air
- Color: Texture Black
- Manufacturer Part Number: 4G-OPAISN-0016
- Placement on Vehicle: Right
- Brand: Blueveg
- Fitment Type: Performance/Custom
- Warranty: 90 Day
- Mounting Hardware Included: Yes
This Product Is Designed To Fit The Following Vehicles. 5VZ-FE 3.4 Litre V6. Cold Air Intake Snorkel. UV Resistance ABS Plastic. For Maximum Strength and Longevity In Harsh. Minor Drilling / Cutting Required For Mounting. Fit 3.4L V6 Engine Model Only. Will Not Fit 4 Cylinder Model. The item “Intake Snorkel Kit For 95-04 Tacoma 96-02 4Runner 3.4L V6 Air Intake Offroad New” is in sale since Thursday, July 23, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “ledin-us” and is located in Baldwin Park, California. This item can be shipped to United States.
- Superseded Part Number: 5VZ-FE 3.4 Litre V6 Engine Model
- Diameter: 3in.
- Material: Plastic
- Type: Snorkel Kit
- Features: Cold-Air
- Color: Texture Black
- Manufacturer Part Number: MSAISN-0016
- Placement on Vehicle: Right
- Brand: LEDIN
- Fitment Type: Performance/Custom
- Warranty: 90 Day
- Mounting Hardware Included: Yes
Please review our interchange below, to verify proper fitment. For Toyota Tacoma 95-04 4WD Set Of 2 Front Outer & Inner Tie Rod Ends KIT Moog. Steering Tie Rod Ends KIT. Front Inner Steering Tie Rod Ends Driver Left And Passenger Right Side. Front Passenger Right Outer Steering Tie Rod End. Front Driver Left Outer Steering Tie Rod End. ES3545 / ES3546 / EV433. Please read below before purchasing. Interchange tables are for American Market vehicles. All electrical parts are non-refundable and non-returnable with no exceptions. Please make sure any electrical parts are correct before purchasing. It is out of our hands and is considered the post office responsibility. If you need more items please let us know and we will make a special listing for you. The item “For Toyota Tacoma 95-04 4WD Set Of 2 Front Outer & Inner Tie Rod Ends KIT Moog” is in sale since Thursday, November 14, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Tie Rod Linkages”. The seller is “partzhub_9″ and is located in Stockton, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation, Bangladesh, Guernsey, Gibraltar, Jersey, Liechtenstein, Monaco.
- Item type: Kit
- Superseded Part Number: 45046 39295 / 45047 39175 / 45503 39075
- Interchange Part Number: 4504639295 / 4504739175 / 4550339075
- Position of vechicle: Left Driver Side & Right Passanger Side
- Series: Premium Chassis
- Kit Parts Included: Inner Tie Rod
- Kit or Single Part: Kit
- Manufacturer Part Number: ES3545 / ES3546 / EV433
- Part Type: Tie Rod Ends
- Placement on Vehicle: Left
- Other Part Number: 45046-39295 / 45047-39175 / 45503-39075
- Brand: Moog Quality
- Fitment Type: Direct Replacement
- Warranty: 2 Year
Eibach E80-82-006-01-22 Stage 1 Lift Kit for 95-04 Toyota Tacoma 6-Lug Models. &###x27BB; Perfectly matched system of lift springs and shocks for maximum travel and performance &###x27BB; 2.0 – 3.0 of lift or leveling for your Truck, Jeep or SUV &###x27BB; Manufactured using race winning off-road race spring technology &###x27BB; Developed to provide balanced ride quality, control and off-road capability &###x27BB; Made In U. Tracking information will be posted to your sale as soon as it is available. These charges are borne by you; we have no control over these charges and cannot predict what they may be. Additionally, when ordering from Trends Auto, you are considered the importer of record and must comply with all laws and regulations. Furthermore, your privacy is important to us, and we know that you care about how information about your order is used and shared. Please note the following. Get business information that counts! – Vendio Counters are active content free. The item “Eibach E80-82-006-01-22 Stage 1 Lift Kit for 95-04 Toyota Tacoma 6-Lug Models” is in sale since Wednesday, January 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “trendsauto” and is located in Greenville, Wisconsin. This item can be shipped to United States.
- Brand: Eibach
- Manufacturer Part Number: E80-82-006-01-22