Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE Pocket Rivet Bolt Fender Flares 2016 Toyota Tacoma Complete Set. Extension Style FENDER FLARES Make: Fits Toyota Model: Fits Tundra For Both 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will not Fit Crew Cab Models. Not Compatible w/ Flareside Models. No Cracking and No Chalking! Finish: Flares come in a BLACK SAND BLAST TEXTURED FINISH, and IS NOT MEANT TO BE PAINTED What comes with this listing: 1 A set of 4 Fender Flares 2 All necessary mounting hardware including seals and screws 3 Detailed instruction sheet for installation 4 Flares arrive ready for installation Description of Pictures Figure 1 shows what the flares would look like on an actual vehicle Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Black Sand Blast Textured Finish. Flare Height: Front 3.0″ ; Rear 3.0″. Tire Coverage: Front 1.5″ ; Rear 1.5″ Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: Extension
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installation: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- IMPORTANT NOTE (1): For 98.2\
- Flare Height: Front 3.0\
- Tire Coverage: Front 1.5\
- IMPORTANT NOTE (2): Not Compatible with Crew Cab Models
- Color: Black Sand Blast Textured; Not Meant to be Painted
- Finish: Black Sand Blast Textured
- Manufacturer Part Number: 803-0914B
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Yes
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8030913B
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028318
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will Not Fit Crew Cab Models. Not Compatible with Flareside Models. Height of Flares: Front 3.0″ Rear 3.0″. Additional Tire Coverage: Front 1.75″ Rear 1.75″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Important Note (1): For 98.2\
- Important Note (2): Not Compatible with Crew Cab Models
- Important Note (3): Not Compatible w/ Flareside Models
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Height of Flares: Front 3.0\
- Additional Tire Coverage: Front: 1.75\
- Fitment: Fits Toyota Tundra 2003-2006
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Shipping: Free Shipping to 48 Continental United States
- Pieces in Set (6): RF, RF-1, LF, LF-1, RR, LR
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030914
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028783
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030913
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028240
0400141212 – EXTENSION KIT, STEER – Toyota. See our other listings. Mon-Fri 7am-6pm, Sat 7am-4pm. The item “Toyota OEM Steering Extension Kit 04001-41212 Factory Various Models” is in sale since Wednesday, May 9, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other”. The seller is “smtoyotascion” and is located in Rancho Santa Margarita, California. This item can be shipped to United States, Canada, Philippines, Cayman islands.
- Manufacturer Part Number: 0400141212
- Brand: Toyota
- Type: Kit
- Headlight Style: Factory
- Certifications: OE
Auto Elementss PVT LTD. CUSTOMER SERVICE Mo – FR. Note : Without Fender Flare Holes. 1 X Rear Bumper Center Face Bar Chrome Steel. 1 X Rear Side Bumper End LH Chrome. 1 X Rear Side Bumper End RH Chrome. Brand New in the Box – Fit and Quality Guaranteed. Let us better serve you. LH : DRIVER SIDE (IN US). RH : PASSENGER SIDE (IN US). ALL OF OUR LAMP PRODUCTS QUALIFIED DOT AND SAE SPECIFICATION. Compatible with the following vehicles: Toyota. 96-98 4Runner Base/ SR5 Model. Do you still have unanswered questions? The item “Rear Chrome Bumper + Extension Ends For 1996-1998 Toyota 4Runner Base/SR5 Model” is in sale since Wednesday, November 20, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “autoelementss247″ and is located in Multiple Locations. This item can be shipped to United States.
- Modified Item: No
- Superseded Part Number: 5210535130
- Country/Region of Manufacture: Taiwan
- Custom Bundle: Yes
- Interchange Part Number: TO1102219
- Material: Stainless Steel
- Type: Bumper Cover
- Features: New / aftermarket
- Color: Chrome
- Surface Finish: Chrome
- Manufacturer Part Number: PCVO720
- Location: USA Online
- Placement on Vehicle: Left
- Other Part Number: 5210535130 5210635061 521073505
- Brand: Perfect Fit
- Fitment Type: Direct Replacement
- Non-Domestic Product: Yes
- Bumper Cut-outs: N/A
- Warranty: 1 Year
Replacement Auto Body Repair. OE Replacement Auto Body Repair – Bumper Cover and Headlight Kit. This OE replacement kit is all you need when doing a repair due to collision or when your old, worn out parts already gave up. Repairs don’t need to be expensive, they just need to be the exact replacement. Brand New in the Box – Fit and Quality Guaranteed! Compatible with the following vehicles. The item “Auto Body Repair For 2005-2011 Toyota Tacoma With Hole for Fender Flare Extension” is in sale since Thursday, September 13, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
- Brand: Perfect Fit
- Bundle Listing: Yes
- Fitment Type: Direct Replacement
- Interchange Part Number: 2011 2010 2009 2008 2007 2006 2005
- Manufacturer Part Number: 14585694
- OE Number: 5211904040, 8111004163, 8115004163
- Other Part Number: 5211904040, 8111004163, 8115004163, TO1000302, TO2502157, TO25031
- Part Name: Auto Body Repair
- UPC: Does Not Apply
- Warranty: 1 Year