PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Rivet / Pocket Bolt
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8020924B
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Shipping: Free Shipping to 48 Continental United States
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 5.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): Excludes Limited Models
- Fitment: Fits Toyota 4Runner 2014-2021
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887027755
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will Not Fit Crew Cab Models. Not Compatible with Flareside Models. Height of Flares: Front 3.0″ Rear 3.0″. Additional Tire Coverage: Front 1.75″ Rear 1.75″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Important Note (1): For 98.2\
- Important Note (2): Not Compatible with Crew Cab Models
- Important Note (3): Not Compatible w/ Flareside Models
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Height of Flares: Front 3.0\
- Additional Tire Coverage: Front: 1.75\
- Fitment: Fits Toyota Tundra 2003-2006
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Rivet; Pocket Bolt
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Shipping: Free Shipping to 48 Continental United States
- Pieces in Set (6): RF, RF-1, LF, LF-1, RR, LR
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8020914B
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028974
Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE Pocket Rivet Bolt Fender Flares 2016 Toyota Tacoma Complete Set. Pocket Bolt Style FENDER FLARES Make: Fits Toyota Model: Fits Tundra For Both 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will not Fit Crew Cab Models. Not Compatible w/ Flareside Models. No Cracking and No Chalking! Finish: Flares come in a BLACK PAINTABLE FINISH, and it can be painted to match color of vehicle What comes with this listing: 1 A set of 4 Fender Flares 2 All necessary mounting hardware including seals and screws 3 Detailed instruction sheet for installation 4 Flares arrive ready for installation Description of Pictures Figure 1 shows what the flares would look like on an actual vehicle Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Black Paintable Finish. Flare Height: Front 3.0″ ; Rear 3.0″. Tire Coverage: Front 1.5″ ; Rear 1.5″ Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: Pocket Rivet; Pocket Bolt
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installation: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- IMPORTANT NOTE (1): For 98.2\
- Flare Height: Front 3.0\
- Tire Coverage: Front 1.5\
- IMPORTANT NOTE (2): Not Compatible with Crew Cab Models
- Color: Black Paintable to Color Match
- Finish: BLACK PAINTABLE Matte
- Manufacturer Part Number: 802-0914
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Yes
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030913
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028240
Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE OE Style Fender Flares Toyota Tundra 07-13 Fits w/ Factory Flaps. OE Style FENDER FLARES. Will Fit Models with Factory Mudflaps. For 66.7″, 78.7″, and 97.6 Fleetside ONLY. Made from UV protected OEM approved ABS material. OEM quality and no drill affixing! No Cracking and No Chalking! Finish: Flares come in a BLACK PAINTABLE FINISH, and it can be painted to match color of vehicle. What comes with this listing. 1 A set of 4 Fender Flares. 2 All necessary mounting hardware including seals and screws. 3 Detailed instruction sheet for installation. 4 Flares arrive ready for installation. Figure 1 is a model used to help you picture what the flares would look like on an actual vehicle. Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Paintable Black Matte Finish. Flare Height: Front 4.0″ ; Rear 4.25″. Tire Coverage: Front 2.0″ ; Rear 2.0″. Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Modified Item: No
- Custom Bundle: No
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: OE
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installatiom: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- Color: Black Paintable to Color Match
- Finish: BLACK PAINTABLE Matte
- Manufacturer Part Number: 800-0904
- IMPORTANT NOTE (1): Will Fit Models with Factory Mudflaps
- IMPORTANT NOTE (2): For 66.7\
- Flare Height and Tire Coverage: Front (H=4.0\
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Non-Domestic Product: No
- Manufacturer Warranty: Yes
Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs – an OE replacement product for your damaged or aged factory part. Replacement – the most affordable brand name for replacement parts that you need! Replacement is a professional brand for autobody, lighting parts, electrical, brake, suspension, intake and exhaust, and cooling and heating products. Brand New in the Box – Fit and Quality Guaranteed! 5211904040, TO1000302, 5381104100, TO1241208. WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. (1) Bumper Cover, and (1) Fender. Compatible with the following vehicles. The item “Bumper Cover Kit For 2005-2011 Toyota Tacoma Front 2pc with Fender” is in sale since Thursday, May 24, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “carpartswholesale” and is located in Las Vegas, Nevada. This item can be shipped to United States.
New Kit Fender Front Quarter Panel Passenger Right Side RH Hand Sedan TO1241102. Is your vehicle sporting an eyesore after a literal fender bender? If you’re searching for a factory look at a great value, choose a Replacement fender for your next repair job. Replacement brand fenders come pre-primed and offer easy installation with a perfect fit – all at a price that’s far less than original equipment. Designed as a direct replacement for your original fender. Made to factory specifications for a hassle-free installation, guaranteed. Easy to Prep & Paint. Premium, pre-primed finish ready for sanding and refinish process. Ready to restore your vehicle to like-new condition. Benchmark Design and Manufacturing Processes. Replacement brand fenders are the result of extensive research and development, ensuring a state-of-the-art design and flawless performance. Lean manufacturing process keeps costs down and quality high. Sedan or Wagon, For Models Made in Japan or USA; Location : Front, Right. Brand New in the Box – Fit and Quality Guaranteed! 5380102050, TO1241102, 5387512210, TO1249104. WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. (1) Fender, and (1) Fender Liner. Compatible with the following vehicles. 93 Corolla All Trac. 93-95,97 Corolla LE. 93-97 Corolla (submodel: Base, DX). The item “New Kit Fender Front Quarter Panel Passenger Right Side RH Hand Sedan TO1241102″ is in sale since Thursday, June 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Fenders”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
Fender For 03-08 Pontiac Vibe Front Right Primed Steel CAPA with Molding Holes. Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs – an OE replacement product for your damaged or aged factory part. Replacement – the most affordable brand name for replacement parts that you need! Replacement is a professional brand for autobody, lighting parts, electrical, brake, suspension, intake and exhaust, and cooling and heating products. Brand New in the Box – Fit and Quality Guaranteed! Compatible with the following vehicles. The item “Fender For 03-08 Pontiac Vibe Front Right Primed Steel CAPA with Molding Holes” is in sale since Sunday, July 3, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Fenders”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
- Brand: Perfect Fit
- Bulb Included: With bulb(s)
- Bulb Type: Halogen
- Bundle Description: – One (1) Passenger Side Headlight [Right] – One (1) Passenger Side Turn Signal Light [Right]
- Bundle Listing: Yes
- Color/Finish: Clear Lens
- Components: (1) Headlight, and (1) Turn Signal Light
- Custom Bundle: Yes
- Fitment Type: Direct Replacement
- Headlight Type: Composite
- Interchange Part Number: 811100C020
- Manufacturer Part Number: 14463019
- OE Number: 811100C020, 815100C020
- Other Part Number: 811100C020, 815100C020
- Part Link Number: TO2503144, TO2531143
- Part Name: Auto Body Repair
- Placement on Vehicle: Right
- Superseded Part Number: 811100C020
- Turn Signal Light Color/Finish: Clear & Amber Lens
- UPC: Does Not Apply
- Warranty: 1-year unlimited-mileage warranty
Replacement Auto Body Repair. OE Replacement Auto Body Repair – Bumper Cover and Fender Kit. Front, Passenger Side Fender. Front, Driver Side Fender. This OE replacement kit is all you need when doing a repair due to collision or when your old, worn out parts already gave up. Repairs don’t need to be expensive, they just need to be the exact replacement; we have the best option for you – Replacement brand parts are the most affordable solution for your replacement needs! For Models With LED Headlights and Pre-Collision System; Location : Front. Brand New in the Box – Fit and Quality Guaranteed! Bumper cover license plate provision. Without license plate provision. Bumper cover parking aid sensor holes. With parking aid sensor holes. Bumper cover fog light holes. With Fog Light Holes. Bumper cover receiver and tow hook hole. With tow hook hole. 5211947920, TO1000360, 5380247040, TO1240232, 5380147040, TO1241232. (1) Bumper Cover, and (2) Fenders. Bumper cover product fit. Compatible with the following vehicles. The item “Bumper Cover Kit For 2010-2011 Toyota Prius Front 3pc with Fender” is in sale since Tuesday, October 15, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
- Brand: Perfect Fit
- Bumper Cover License Plate Provision: Without license plate provision
- Bumper Cover Parking Aid Sensor Holes: With parking aid sensor holes
- Bumper Cover Product Fit: Direct Fit
- Bumper Cover Receiver And Tow Hook Hole: With tow hook hole
- Bumper Cut-outs: Fog Light Cut-out
- Bundle Description: – One (1) Front Bumper Cover [Front] – One (1) Front, Passenger Side Fender [Front, Right] – One (1) Front, Driver Side Fender [Front, Left]
- Bundle Listing: Yes
- Color: Unfinished
- Components: (1) Bumper Cover, and (2) Fenders
- Custom Bundle: Yes
- Fender Molding Holes: Without Molding Holes
- Fitment Type: Direct Replacement
- Interchange Part Number: 5211947920
- Manufacturer Part Number: 14425780
- Material: Steel,Plastic
- OE Number: 5211947920, 5380247040, 5380147040
- Other Part Number: 5211947920, 5380247040, 5380147040
- Part Link Number: TO1000360, TO1240232, TO1241232
- Part Name: Auto Body Repair
- Placement on Vehicle: Front
- Superseded Part Number: 5211947920
- UPC: Does Not Apply
- Warranty: 1-year unlimited-mileage warranty
Bumper Cover Kit For 2010-11 Toyota Prius Front Bumper Cover and Fender 2pc. Replacement Auto Body Repair. OE Replacement Auto Body Repair – Bumper Cover and Fender Kit. Front, Driver Side Fender. This OE replacement kit is all you need when doing a repair due to collision or when your old, worn out parts already gave up. Repairs don’t need to be expensive, they just need to be the exact replacement; we have the best option for you – Replacement brand parts are the most affordable solution for your replacement needs! For Models With Halogen Headlights and Pre-Collision System; Location : Front. Brand New in the Box – Fit and Quality Guaranteed! Bumper cover license plate provision. Without license plate provision. Bumper cover parking aid sensor holes. With parking aid sensor holes. Bumper cover fog light holes. With Fog Light Holes. Bumper cover receiver and tow hook hole. With tow hook hole. 5211947918, TO1000376, 5380247040, TO1240232. (1) Bumper Cover, and (1) Fender. Bumper cover product fit. Compatible with the following vehicles. The item “Bumper Cover Kit For 2010-11 Toyota Prius Front Bumper Cover and Fender 2pc” is in sale since Thursday, April 11, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
- Brand: Perfect Fit
- Bumper Cover License Plate Provision: Without license plate provision
- Bumper Cover Parking Aid Sensor Holes: With parking aid sensor holes
- Bumper Cover Product Fit: Direct Fit
- Bumper Cover Receiver And Tow Hook Hole: With tow hook hole
- Bumper Cut-outs: Fog Light Cut-out
- Bundle Description: – One (1) Front Bumper Cover [Front] – One (1) Front, Driver Side Fender [Front, Left]
- Bundle Listing: Yes
- Color: Unfinished
- Components: (1) Bumper Cover, and (1) Fender
- Custom Bundle: Yes
- Fender Molding Holes: Without Molding Holes
- Fitment Type: Direct Replacement
- Interchange Part Number: 5211947918
- Manufacturer Part Number: 14467937
- Material: Steel,Plastic
- OE Number: 5211947918, 5380247040
- Other Part Number: 5211947918, 5380247040
- Part Link Number: TO1000376, TO1240232
- Part Name: Auto Body Repair
- Placement on Vehicle: Front
- Returns Policy: 90-Day Return Policy
- Superseded Part Number: 5211947918
- UPC: Does Not Apply
- Warranty: 1-year unlimited-mileage warranty