May 2, 2023
New 2024 Toyota Tacoma Gets A Manual Transmission Confirmed
September 3, 2018
Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck This is an Electric R/C assembly kit of one of the most representative of modern pick-up trucks. The model features a realistic ladder frame, 3-speed transmission and shaft drive 4WD system. A highly detailed injection moulded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck’s overall realism. METAL & METAL PLATED PARTS An abundance of metal parts such as ladder frame, under guard, front guard, leaf springs and aluminium friction dampers are included. Roll bar, road light, front grille, front/rear bumper, side-step, diff guard, wheels and muffler feature metal-plated finish. (Multi-Function Unit includes LED lights). Multi Function Unit will bring even more enjoyment to the operation of the R/C truck. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your model. This will connect into the receiver unit on the truck – this is why a 4 channel radio is suggested, even though the 4th channel at this stage isn’t used. Durable and realistic ladder frame consists of steel channel and resin cross member. F/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down. QUICK BATTERY HOLDER Battery held in low position for excellent weight balance and stability. Easy access holder allows running battery to be exchanged without removing body. 4WS STEERING ROD 4 wheel steering can be enabled by adding kit supplied rear axle tension rod. 4-wheel steering enables even tighter turning radius, perfect when using truck indoors or in confined space. WHEELS & TYRES Newly designed monster truck tyres feature lug pattern suited for driving on rough surfaces. Apply cement to wheels and tires when running on rough terrain. Worn out wheel hubs can be replaced with 53056 Pin type Wheel Adapter. 3-SPEED TRANSMISSION – Newly designed 3-speed transmission provides smooth low speed running, and allows gear changing while running. Low gear > 2nd gear > Top gear 1:64.39 > 1:35.20 > 1:21.14 SLIPPER CLUTCH – Includes slipper clutch as standard part to protect gears during tough off-road running. Differential lock, essential for driving on rough roads, may be easily enabled by simply removing F/R diff case covers and removing screw pins. By using differential lock, drive power is transmitted even if wheels on one side are not grounded. LEAF SPRING SUSPENSION F/R suspension with friction dampers allows tension adjustment by altering number of leaf springs. FRICTION DAMPERS – Features red anodized aluminum cylinder. Damping effect can be adjusted by applying separately available Friction Damper Grease and adding o-rings. Select according to ground conditions and leaf spring number. Standard: normal running Default settings. Soft: low-speed, high grip running Use 2 leaf springs and adjust tension using damper grease (soft) 53174. Hard: stable and high-speed running Use 5 leaf springs and apply damper grease (medium) 53175 or (hard) 53176 REQUIRED ITEMS (NOT INCLUDED): RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO – Kit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly recommended. A special price bearing pack is available consisting of our own roller bearings in our store. Required: Size: Item #: 35 1150 BEA1150 4 1260 BEA1260 2 850 BEA850 – This kit is designed to be used only with pre-supplied type 540 motor and pinion gear. It is not recommended that any faster motor is used – There is some debate as to whether a crawling motor would be suitable with the drive train. Requires 4-channel, 2-servo digital proportional R/C unit with electronic speed controller with variable forward and reverse function. UK Importer recommends use of Carson 6 Channel stick type transmitter with slide trim for ease of gear change when running and future upgradeability to MFU system. 2ch R/C unit cannot be used as it cannot shift gears. PCM type receiver may not be used as it may cause radio interference when using with separately available Multi Function Unit. ELECTRONIC SPEED CONTROLLER – Ideally use high power type ESC with reverse function (maximum continuous current: forward 120A, reverse 60A, FET regulation). A high-spec ESC is especially recommended when running on rough terrain. We recommend the Mtroniks 20 and Ansmann 12 ESCs. The basic Tamiya TBLE02S can also be used on regular tarmac. SERVO – While standard type steering servo is sufficient, high torque servo may be beneficial when running on rough terrain. Use of ITEM 50473 High Torque Servo Saver White or ITEM 51000 High Torque Servo Saver Black will further improve efficacy. Tamiya recommend you do not use non standard sized or high speed servos. BATTERIES – 7.2V running battery with Tamiya connector DIFFERENTIAL GEAR Durable resin gear case with integrated die-cast differential gear. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC” is in sale since Thursday, August 23, 2018. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58397
- Model: Toyota
August 21, 2018
Climate Control Module Repair Kit for models with Manual A/C Dorman 599-040
Climate Control Module Repair Kit for models with Manual A/C Dorman 599-040. Climate Control Module Repair Kit for models with Manual A/C. Only fits models that have Manual Air Conditioning controls CHECK THE APPLICATION GUIDE ABOVE FOR YOUR YEAR, MAKE, MODEL, & READ THE NOTE TO MAKE SURE THIS FITS YOUR APPLICATION. Genuine Dorman replacement Part, NEW and Guaranteed to FIT! Powered by SixBit’s eCommerce Solution. The item “Climate Control Module Repair Kit for models with Manual A/C Dorman 599-040″ is in sale since Saturday, January 6, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Conditioning & Heat\A/C & Heater Controls”. The seller is “tennesseeautosales” and is located in Elizabethton, Tennessee. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
- Brand: Dorman
- Interchange Part Number: 55904-48110, 55904-48210
- Warranty: Lifetime
- Manufacturer Part Number: 599-040
- MPN: 599-040
May 22, 2018
Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck This is an Electric R/C assembly kit of one of the most representative of modern pick-up trucks. The model features a realistic ladder frame, 3-speed transmission and shaft drive 4WD system. A highly detailed injection moulded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck’s overall realism. METAL & METAL PLATED PARTS An abundance of metal parts such as ladder frame, under guard, front guard, leaf springs and aluminium friction dampers are included. Roll bar, road light, front grille, front/rear bumper, side-step, diff guard, wheels and muffler feature metal-plated finish. (Multi-Function Unit includes LED lights). Multi Function Unit will bring even more enjoyment to the operation of the R/C truck. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your model. This will connect into the receiver unit on the truck – this is why a 4 channel radio is suggested, even though the 4th channel at this stage isn’t used. Durable and realistic ladder frame consists of steel channel and resin cross member. F/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down. QUICK BATTERY HOLDER Battery held in low position for excellent weight balance and stability. Easy access holder allows running battery to be exchanged without removing body. 4WS STEERING ROD 4 wheel steering can be enabled by adding kit supplied rear axle tension rod. 4-wheel steering enables even tighter turning radius, perfect when using truck indoors or in confined space. WHEELS & TYRES Newly designed monster truck tyres feature lug pattern suited for driving on rough surfaces. Apply cement to wheels and tires when running on rough terrain. Worn out wheel hubs can be replaced with 53056 Pin type Wheel Adapter. 3-SPEED TRANSMISSION – Newly designed 3-speed transmission provides smooth low speed running, and allows gear changing while running. Low gear > 2nd gear > Top gear 1:64.39 > 1:35.20 > 1:21.14 SLIPPER CLUTCH – Includes slipper clutch as standard part to protect gears during tough off-road running. Differential lock, essential for driving on rough roads, may be easily enabled by simply removing F/R diff case covers and removing screw pins. By using differential lock, drive power is transmitted even if wheels on one side are not grounded. LEAF SPRING SUSPENSION F/R suspension with friction dampers allows tension adjustment by altering number of leaf springs. FRICTION DAMPERS – Features red anodized aluminum cylinder. Damping effect can be adjusted by applying separately available Friction Damper Grease and adding o-rings. Select according to ground conditions and leaf spring number. Standard: normal running Default settings. Soft: low-speed, high grip running Use 2 leaf springs and adjust tension using damper grease (soft) 53174. Hard: stable and high-speed running Use 5 leaf springs and apply damper grease (medium) 53175 or (hard) 53176 REQUIRED ITEMS (NOT INCLUDED): RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO – Kit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly recommended. A special price bearing pack is available consisting of our own roller bearings in our store. Required: Size: Item #: 35 1150 BEA1150 4 1260 BEA1260 2 850 BEA850 – This kit is designed to be used only with pre-supplied type 540 motor and pinion gear. It is not recommended that any faster motor is used – There is some debate as to whether a crawling motor would be suitable with the drive train. Requires 4-channel, 2-servo digital proportional R/C unit with electronic speed controller with variable forward and reverse function. UK Importer recommends use of Carson 6 Channel stick type transmitter with slide trim for ease of gear change when running and future upgradeability to MFU system. 2ch R/C unit cannot be used as it cannot shift gears. PCM type receiver may not be used as it may cause radio interference when using with separately available Multi Function Unit. ELECTRONIC SPEED CONTROLLER – Ideally use high power type ESC with reverse function (maximum continuous current: forward 120A, reverse 60A, FET regulation). A high-spec ESC is especially recommended when running on rough terrain. We recommend the Mtroniks 20 and Ansmann 12 ESCs. The basic Tamiya TBLE02S can also be used on regular tarmac. SERVO – While standard type steering servo is sufficient, high torque servo may be beneficial when running on rough terrain. Use of ITEM 50473 High Torque Servo Saver White or ITEM 51000 High Torque Servo Saver Black will further improve efficacy. Tamiya recommend you do not use non standard sized or high speed servos. BATTERIES – 7.2V running battery with Tamiya connector DIFFERENTIAL GEAR Durable resin gear case with integrated die-cast differential gear. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC” is in sale since Wednesday, May 9, 2018. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58397
- Model: Toyota
April 9, 2018
For Toyota Yaris 1.4 D4d Manual Clutch Cover Disc Bearing Kit Japanese Models
Heater Resistor / Blower. Head Gasket & Sets. CV Joints / Boot Kits. Brake Accessories / Sensors. Brake Discs & Pads. Brake Shoes / Kit. MEYLE HD (HEAVY DUTY). STABILISER / ANTIROLL BAR LINK. Timing / Cam Belt. Timing / Cam Belt Kit. Fan / Drive Belt. Wiper Blades / Kits / Arms. Antiroll Bar D Bushes. Track / Tie Rod Ends. Control / Suspension Arm. Wheel Bearings / Hubs. Intermediate Shaft / Stub. Wiper Motor / Linkage. Propshaft Mounting / Coupling. Shock Absorber / Damper. Strut Mounts / Bearings. Bump Stop / Dust Kit. Leaf Spring & Fittings. ABS / Wheel Speed Sensor. Crank / Camshaft Sensor. FOR TOYOTA YARIS 1.4 D4D MANUAL CLUTCH COVER DISC BEARING KIT JAPANESE MODELS. BRAND NEW CLUTCH KIT CLUTCH COVER – CLUTCH DISC – RELEASE BEARING Fits: TOYOTA YARIS 1.4D 75 BHP 5 Speed Manual Transmission Only! 2001 – 2005 ENGINE CODE: 1ND-TV JAPAN BUILT ONLY! Not compatible with French built! BRAND NEW CLUTCH KIT. CLUTCH COVER – CLUTCH DISC – RELEASE BEARING. TOYOTA YARIS 1.4D 75 BHP 5 Speed Manual Transmission Only! Car Parts Centre UK. Your one stop quality parts shop. Huddersfield based distributor of quality branded parts for your car and light commercial vehicles at a fraction of the main agent prices. Authorised Distributors of: LUK / ELRING / MEYLE / FAG / SACHS / PIERBURG /. This is down to our offerings of quality parts and impeccable service. 9.00am – 5.00pm. 00am – 4.00pm. PLEASE CONTACT FOR AVAILABILITY BEFORE DEPARTURE. We do ask that all payments are made immediate to avoid delays in dispatching your order. A surcharge may be applied for deliveries to these areas. These areas and the corresponding charges can be found below: The following Postcode will incur additional surcharge costs. AB31 TO AB56, ON, BT, GY, HS, IM, IV, JE, KW, PA20 TO PA78 AND ON.. Any damages must be reported to us within 24 hours for us to raise any claims with our courier. Any claims after 24 hours will be dismissed for a claim. Please be rest assured we strive in supplying branded OE quality parts which meet or exceed Industry specification. We strive to offer a 5 out of 5 star service to all customers! We aim to reply to all messages within 24 hours. DUAL MASS FLYWHEEL & CLUTCH KIT FOR HONDA ACCORD CIVIC CR-V FR-V 2.2 CTDI 2004. FOR ROVER 75 MG ZT ZT-T 2.0 CDTi DIESEL NEW 3 PIECE CLUTCH KIT CSC BEARING. FOR HONDA ACCORD CIVIC FRV CRV 2.2 CTDI CLUTCH DUAL MASS FLYWHEEL KIT SCREW SET. FOR JAGUAR X TYPE REAR TRAILING SUSPENSION CONTROL ARM BUSH BUSHES XTYPE X-TYPE. FOR RENAULT CLIO 197 200 MEGANE MK3 RS SPORT TOP AND BOTTOM HUB BALL JOINT PIVOT. FOR LEXUS IS200 GXE10 IS300 FRONT LOWER CONTROL SUSPENSION ARM REAR UPPER BUSH. FOR BMW 3 SERIES E36 E46 REAR SHOCK TOP MOUNT PAIR MEYLE HD. Stay up to date with our special offers. The item “FOR TOYOTA YARIS 1.4 D4D MANUAL CLUTCH COVER DISC BEARING KIT JAPANESE MODELS” is in sale since Saturday, November 16, 2013. This item is in the category “Vehicle Parts & Accessories\Car Parts\Transmission & Drivetrain\Complete Clutch Kits”. The seller is “johnyboy-1″ and is located in GB. This item can be shipped to United Kingdom, United States, Japan, Canada, Ireland, Australia, Germany, France, Greece, Italy, Spain, Russian federation, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, Hungary, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Sweden, Brazil, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.
- Brand: EXEDY
- Manufacturer Part Number: Does Not Apply
- Clutch Kit Type: Friction Clutch
March 27, 2018
Toyota Manual Hub Conversion
March 4, 2018
Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck This is an Electric R/C assembly kit of one of the most representative of modern pick-up trucks. The model features a realistic ladder frame, 3-speed transmission and shaft drive 4WD system. A highly detailed injection moulded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck’s overall realism. METAL & METAL PLATED PARTS An abundance of metal parts such as ladder frame, under guard, front guard, leaf springs and aluminium friction dampers are included. Roll bar, road light, front grille, front/rear bumper, side-step, diff guard, wheels and muffler feature metal-plated finish. (Multi-Function Unit includes LED lights). Multi Function Unit will bring even more enjoyment to the operation of the R/C truck. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your model. This will connect into the receiver unit on the truck – this is why a 4 channel radio is suggested, even though the 4th channel at this stage isn’t used. Durable and realistic ladder frame consists of steel channel and resin cross member. F/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down. QUICK BATTERY HOLDER Battery held in low position for excellent weight balance and stability. Easy access holder allows running battery to be exchanged without removing body. 4WS STEERING ROD 4 wheel steering can be enabled by adding kit supplied rear axle tension rod. 4-wheel steering enables even tighter turning radius, perfect when using truck indoors or in confined space. WHEELS & TYRES Newly designed monster truck tyres feature lug pattern suited for driving on rough surfaces. Apply cement to wheels and tires when running on rough terrain. Worn out wheel hubs can be replaced with 53056 Pin type Wheel Adapter. 3-SPEED TRANSMISSION – Newly designed 3-speed transmission provides smooth low speed running, and allows gear changing while running. Low gear > 2nd gear > Top gear 1:64.39 > 1:35.20 > 1:21.14 SLIPPER CLUTCH – Includes slipper clutch as standard part to protect gears during tough off-road running. Differential lock, essential for driving on rough roads, may be easily enabled by simply removing F/R diff case covers and removing screw pins. By using differential lock, drive power is transmitted even if wheels on one side are not grounded. LEAF SPRING SUSPENSION F/R suspension with friction dampers allows tension adjustment by altering number of leaf springs. FRICTION DAMPERS – Features red anodized aluminum cylinder. Damping effect can be adjusted by applying separately available Friction Damper Grease and adding o-rings. Select according to ground conditions and leaf spring number. Standard: normal running Default settings. Soft: low-speed, high grip running Use 2 leaf springs and adjust tension using damper grease (soft) 53174. Hard: stable and high-speed running Use 5 leaf springs and apply damper grease (medium) 53175 or (hard) 53176 REQUIRED ITEMS (NOT INCLUDED): RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO – Kit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly recommended. A special price bearing pack is available consisting of our own roller bearings in our store. Required: Size: Item #: 35 1150 BEA1150 4 1260 BEA1260 2 850 BEA850 – This kit is designed to be used only with pre-supplied type 540 motor and pinion gear. It is not recommended that any faster motor is used – There is some debate as to whether a crawling motor would be suitable with the drive train. Requires 4-channel, 2-servo digital proportional R/C unit with electronic speed controller with variable forward and reverse function. UK Importer recommends use of Carson 6 Channel stick type transmitter with slide trim for ease of gear change when running and future upgradeability to MFU system. 2ch R/C unit cannot be used as it cannot shift gears. PCM type receiver may not be used as it may cause radio interference when using with separately available Multi Function Unit. ELECTRONIC SPEED CONTROLLER – Ideally use high power type ESC with reverse function (maximum continuous current: forward 120A, reverse 60A, FET regulation). A high-spec ESC is especially recommended when running on rough terrain. We recommend the Mtroniks 20 and Ansmann 12 ESCs. The basic Tamiya TBLE02S can also be used on regular tarmac. SERVO – While standard type steering servo is sufficient, high torque servo may be beneficial when running on rough terrain. Use of ITEM 50473 High Torque Servo Saver White or ITEM 51000 High Torque Servo Saver Black will further improve efficacy. Tamiya recommend you do not use non standard sized or high speed servos. BATTERIES – 7.2V running battery with Tamiya connector DIFFERENTIAL GEAR Durable resin gear case with integrated die-cast differential gear. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC” is in sale since Friday, March 02, 2018. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58397
- Model: Toyota
December 28, 2017
Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck This is an Electric R/C assembly kit of one of the most representative of modern pick-up trucks. The model features a realistic ladder frame, 3-speed transmission and shaft drive 4WD system. A highly detailed injection moulded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck’s overall realism. METAL & METAL PLATED PARTS An abundance of metal parts such as ladder frame, under guard, front guard, leaf springs and aluminium friction dampers are included. Roll bar, road light, front grille, front/rear bumper, side-step, diff guard, wheels and muffler feature metal-plated finish. (Multi-Function Unit includes LED lights). Multi Function Unit will bring even more enjoyment to the operation of the R/C truck. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your model. This will connect into the receiver unit on the truck – this is why a 4 channel radio is suggested, even though the 4th channel at this stage isn’t used. Durable and realistic ladder frame consists of steel channel and resin cross member. F/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down. QUICK BATTERY HOLDER Battery held in low position for excellent weight balance and stability. Easy access holder allows running battery to be exchanged without removing body. 4WS STEERING ROD 4 wheel steering can be enabled by adding kit supplied rear axle tension rod. 4-wheel steering enables even tighter turning radius, perfect when using truck indoors or in confined space. WHEELS & TYRES Newly designed monster truck tyres feature lug pattern suited for driving on rough surfaces. Apply cement to wheels and tires when running on rough terrain. Worn out wheel hubs can be replaced with 53056 Pin type Wheel Adapter. 3-SPEED TRANSMISSION – Newly designed 3-speed transmission provides smooth low speed running, and allows gear changing while running. Low gear > 2nd gear > Top gear 1:64.39 > 1:35.20 > 1:21.14 SLIPPER CLUTCH – Includes slipper clutch as standard part to protect gears during tough off-road running. Differential lock, essential for driving on rough roads, may be easily enabled by simply removing F/R diff case covers and removing screw pins. By using differential lock, drive power is transmitted even if wheels on one side are not grounded. LEAF SPRING SUSPENSION F/R suspension with friction dampers allows tension adjustment by altering number of leaf springs. FRICTION DAMPERS – Features red anodized aluminum cylinder. Damping effect can be adjusted by applying separately available Friction Damper Grease and adding o-rings. Select according to ground conditions and leaf spring number. Standard: normal running Default settings. Soft: low-speed, high grip running Use 2 leaf springs and adjust tension using damper grease (soft) 53174. Hard: stable and high-speed running Use 5 leaf springs and apply damper grease (medium) 53175 or (hard) 53176 REQUIRED ITEMS (NOT INCLUDED): RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO – Kit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly recommended. A special price bearing pack is available consisting of our own roller bearings in our store. Required: Size: Item #: 35 1150 BEA1150 4 1260 BEA1260 2 850 BEA850 – This kit is designed to be used only with pre-supplied type 540 motor and pinion gear. It is not recommended that any faster motor is used – There is some debate as to whether a crawling motor would be suitable with the drive train. Requires 4-channel, 2-servo digital proportional R/C unit with electronic speed controller with variable forward and reverse function. UK Importer recommends use of Carson 6 Channel stick type transmitter with slide trim for ease of gear change when running and future upgradeability to MFU system. 2ch R/C unit cannot be used as it cannot shift gears. PCM type receiver may not be used as it may cause radio interference when using with separately available Multi Function Unit. ELECTRONIC SPEED CONTROLLER – Ideally use high power type ESC with reverse function (maximum continuous current: forward 120A, reverse 60A, FET regulation). A high-spec ESC is especially recommended when running on rough terrain. We recommend the Mtroniks 20 and Ansmann 12 ESCs. The basic Tamiya TBLE02S can also be used on regular tarmac. SERVO – While standard type steering servo is sufficient, high torque servo may be beneficial when running on rough terrain. Use of ITEM 50473 High Torque Servo Saver White or ITEM 51000 High Torque Servo Saver Black will further improve efficacy. Tamiya recommend you do not use non standard sized or high speed servos. BATTERIES – 7.2V running battery with Tamiya connector DIFFERENTIAL GEAR Durable resin gear case with integrated die-cast differential gear. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58397 Toyota Hilux 3 Speed Manual Radio Control Self Assembly Kit 110 RC” is in sale since Saturday, October 28, 2017. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58397
- Model: Toyota
December 27, 2017
Tamiya 58415 Toyota Tundra 3 Speed Manual Radio Control Assembly Kit 110 RC
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck This is an Electric R/C assembly kit of one of the most representative of modern pick-up trucks. The model features a realistic ladder frame, 3-speed transmission and shaft drive 4WD system. A highly detailed injection moulded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck’s overall realism. METAL & METAL PLATED PARTS An abundance of metal parts such as ladder frame, under guard, front guard, leaf springs and aluminium friction dampers are included. Roll bar, road light, front grille, front/rear bumper, side-step, diff guard, wheels and muffler feature metal-plated finish. (Multi-Function Unit includes LED lights). Multi Function Unit will bring even more enjoyment to the operation of the R/C truck. Featuring realistic sound effects recorded from actual vehicles, controllable LED lights and other movement effects, this unit will greatly expand the potential of your model. This will connect into the receiver unit on the truck – this is why a 4 channel radio is suggested, even though the 4th channel at this stage isn’t used. Durable and realistic ladder frame consists of steel channel and resin cross member. F/R propeller shafts feature universal joint to efficiently transmit power even if suspension is moving up and down. QUICK BATTERY HOLDER Battery held in low position for excellent weight balance and stability. Easy access holder allows running battery to be exchanged without removing body. 4WS STEERING ROD 4 wheel steering can be enabled by adding kit supplied rear axle tension rod. 4-wheel steering enables even tighter turning radius, perfect when using truck indoors or in confined space. WHEELS & TYRES Newly designed monster truck tyres feature lug pattern suited for driving on rough surfaces. Apply cement to wheels and tires when running on rough terrain. Worn out wheel hubs can be replaced with 53056 Pin type Wheel Adapter. 3-SPEED TRANSMISSION – Newly designed 3-speed transmission provides smooth low speed running, and allows gear changing while running. Low gear > 2nd gear > Top gear 1:64.39 > 1:35.20 > 1:21.14 SLIPPER CLUTCH – Includes slipper clutch as standard part to protect gears during tough off-road running. Differential lock, essential for driving on rough roads, may be easily enabled by simply removing F/R diff case covers and removing screw pins. By using differential lock, drive power is transmitted even if wheels on one side are not grounded. LEAF SPRING SUSPENSION F/R suspension with friction dampers allows tension adjustment by altering number of leaf springs. FRICTION DAMPERS – Features red anodized aluminum cylinder. Damping effect can be adjusted by applying separately available Friction Damper Grease and adding o-rings. Select according to ground conditions and leaf spring number. Standard: normal running Default settings. Soft: low-speed, high grip running Use 2 leaf springs and adjust tension using damper grease (soft) 53174. Hard: stable and high-speed running Use 5 leaf springs and apply damper grease (medium) 53175 or (hard) 53176 REQUIRED ITEMS (NOT INCLUDED): RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO – Kit includes a total of 42pcs of bearings (35pcs x 1150, 4pcs x 1260, 2pcs x 850 size metal and 1pc of 1050 size ball bearings). Metal bearings require periodic application of grease to maintain performance. Separately available ball bearings do not require this treatment, and are highly recommended. A special price bearing pack is available consisting of our own roller bearings in our store. Required: Size: Item #: 35 1150 BEA1150 4 1260 BEA1260 2 850 BEA850 – This kit is designed to be used only with pre-supplied type 540 motor and pinion gear. It is not recommended that any faster motor is used – There is some debate as to whether a crawling motor would be suitable with the drive train. Requires 4-channel, 2-servo digital proportional R/C unit with electronic speed controller with variable forward and reverse function. UK Importer recommends use of Carson 6 Channel stick type transmitter with slide trim for ease of gear change when running and future upgradeability to MFU system. 2ch R/C unit cannot be used as it cannot shift gears. PCM type receiver may not be used as it may cause radio interference when using with separately available Multi Function Unit. ELECTRONIC SPEED CONTROLLER – Ideally use high power type ESC with reverse function (maximum continuous current: forward 120A, reverse 60A, FET regulation). A high-spec ESC is especially recommended when running on rough terrain. We recommend the Mtroniks 20 and Ansmann 12 ESCs. The basic Tamiya TBLE02S can also be used on regular tarmac. SERVO – While standard type steering servo is sufficient, high torque servo may be beneficial when running on rough terrain. Use of ITEM 50473 High Torque Servo Saver White or ITEM 51000 High Torque Servo Saver Black will further improve efficacy. Tamiya recommend you do not use non standard sized or high speed servos. BATTERIES – 7.2V running battery with Tamiya connector DIFFERENTIAL GEAR Durable resin gear case with integrated die-cast differential gear. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58415 Toyota Tundra 3 Speed Manual Radio Control Assembly Kit 110 RC” is in sale since Saturday, October 28, 2017. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58415
- Model: Toyota
- Scale: 1:10
December 11, 2017
Tamiya 58519 4×4 Toyota Bruiser 3 Speed Manual Radio Control Assembly Kit 110
Diecast, Kits, Railway, Slot Racing and RC Specialists Over 20 years in the model trade. Tamiya 3 Speed Series – Product Description Follows This Advice… Truck kits are supplied unassembled and (unless otherwise stated) unpainted. For the Truck kits themselves – – You will require an electronic speed controller (order part 45057, listed in our store). You will require a 4 channel or more radio set. You will require 2 servos – Acoms or Carson or Futaba – brand doesn’t matter. You will require a 7.2v battery – any of the ones listed in our store will work. The higher the number, the longer the run time. You will require a battery charger – again, any of those we list as suitable for NIMH or “Tamiya” batteries can be used. Tamiya’s Own Description Of This Truck The R/C Toyota Bruiser was originally released in 1985. It featured a realistic 3 speed transmission and a solid axle leaf spring suspension. The modern reissue edition comes with the same spectacular features. The original layout of the chassis has been kept while modern improvements have been discretely incorporated to bring added fun and function. Specs and Features – 1/10 scale R/C assembly kit. The Bruiser body, including the sleeper cab, is made of durable injection-molded ABS plastic. Metal ladder frame chassis retains the original layout and features a black-finished surface. Newly-designed die-cast transmission is equipped with planetary gears. Refined clutch mechanisms offer smooth gear changes and superb durability. 3-speed gears are possible (1st gear=4WD, 2nd & 3rd gears=Rear Wheel Drive). Newly-designed front/rear axle housings are equipped with differential gears to offer smooth cornering performance. Front and rear differentials may be locked for enhanced off-road performance. Front & rear large diameter tires offer superb traction. Separately available LEDs can be installed in the light cases to depict realistic head and tail lights. Type 540 motor included. On some products we offer a choice of 1st Class post – this typically takes 1 to 2 days but is not a time guaranteed service. All non-Express orders are dispatched in order of receipt. Waste Electrical and Electronic Equipment Regulations 2006: We are registered under the Valpac DTS WEEE scheme, member number 400017. Please dispose of your used electrical items at an authorised recycling centre – if you do not know where your local centre is, please contact the Recycle More scheme for further information. VAT: All prices include VAT at the current rate. We operate under a point of sale system and do not issue VAT receipts with every sale. Supplier text and images used with UK distributor’s permission where appropriate. The item “Tamiya 58519 4×4 Toyota Bruiser 3 Speed Manual Radio Control Assembly Kit 110″ is in sale since Tuesday, December 05, 2017. This item is in the category “Toys & Games\Model Kits\Models”. The seller is “timetunnelmodels” and is located in Fenton Barns, East Lothian. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
- Brand: Tamiya
- MPN: TA58519
- Model: Toyota
- Scale: 1:10