2002 – 2003 Lexus ES300 All Models. 2002 – 2003 Toyota CAMRY Excluding HYBRID Models. 1x Part# Front Lower Right Side Control Arm – K620334 1x Part# Front Lower Left Side Control Arm – K620333 1x Part# Front Lower Left (Driver) Side Suspension Ball Joint – K90346 1x Part# Front Lower Right (Passenger) Side Suspension Ball Joint – K90347 2x Part# Front Driver & Passenger Side Sway Bar End Link – K90344 2x Part# Rear Driver & Passenger Side Sway Bar End Link – K90345 1x Part# Front Driver Side Outer Tie Rod End – ES3600 1x Part# Front Passenger Side Outer Tie Rod End – ES3601 2x Part# Front Drive & Passenger Side Inner Tie Rod End – EV420. Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. Control Arm Bushing Replacement Reference. Control arms themselves do not generally wear out, but the control arm bushings and ball joints do, so you will likely need to remove them to service those components. Also, control arms can become bent or damaged as the result of a collision or driving through a deep pothole, so control arms do need to be inspected for damage. Many control arms are now made from forged or sintered aluminum, so you may need to measure for damage or check it on an alignment machine. Remove the coil spring and steering knuckle by following the steps in previous skill drills. Loosen the bolts holding the upper control arm in place. Note that there might be shim packs held in by the bolts. If so, tape them together in their packs, and label their positions. Remove the lower control arm by removing the bolts holding it in place. As you dismantle the system components, carry out a constant inspection of the parts being removed. Doing so will aid you when you need to order replacement parts. You should also mark mating parts with white paint to aid in reassembly. Inspect the upper and lower control arm for wear or damage. If the control arm bushings show signs of excessive wear or deterioration of the bushing material, they will have to be replaced. Replace the worn bushings in the upper and/or lower control arm. Replacement of control arm bushings can be performed two ways – with a hydraulic press with correctly sized press tools or with an air chisel. Be careful using an air chisel: Damage to the control arm can result, such as gouging the mounting surface of the bushing if you slip with the chisel. Press method: Place the control arm in a hydraulic press supported so the bushing is level to the press head. Using the correct-sized adapter, press the bushing out. Using the press, install the new bushing into the control arm. Be careful to start the bushing in straight, or you could bend the control arm. Press it in until the flange bottoms out. Air chisel method: Install the control arm in a vise. Use an air chisel to work the bushing out. Be careful not to gouge the mating surface of the control arm. Using the air hammer, drive the new bushing into place, making sure it is fully seated. Ball Joint Preventive Maintenance. Some ball joints use zerk grease fittings, which allow for periodic lubrication of the moving ball and stationary socket inside the ball joint. Grease fittings can sometimes be found on other suspension components and need to be lubricated as part of a preventive maintenance program provided by the OEM. Loaded Upper Ball Joint Play Measurement. The most common problem in the suspension system is play, or looseness of the parts. Although many of the parts are designed with special connections that allow for movement to accommodate movement of the wheels, excessive play is actually a bad thing. Excessive play magnifies the feel of road imperfections and makes the steering less responsive to steering wheel input. Excessive play is potentially very damaging, as it causes wear on the connecting parts and tires. Naturally, any amount of play in a fixed part is problematic and is frequently a result of part failure. Remember, unwanted looseness in the suspension system can be extremely dangerous and should be corrected as soon as possible. Obtain a properly sized block of wood to fit between the upper control arm and the frame. Place the block of wood between the upper control arm and frame so that it is secure. Raise the vehicle by lifting the body, using the specified lift points, so that the tire is a few inches off the ground. Support the body with a jack stand. Place a dial indicator on the upper control arm and vertically against the steering knuckle. Place a pry bar under the tire, and pry it upward, watching the dial indicator reading as you pry and release. Record the total amount of movement in the joint, and compare to the OEM specifications. Rock the bottom of the tire in and out, watching for play in the lower ball joint, and compare to OEM specifications. Loaded Lower Ball Joint Play Measurement. Jack up the vehicle, place safety stands under the control arms, and look up the exact procedure in the online service information. Place a dial indicator on the lower control arm and vertically against the steering knuckle. Place a pry bar under the tire and pry it upward, watching the dial indicator reading as you pry and release. Rock the top of the tire in and out, watching for any play in the upper ball joint specifications. Tie Rod End Removing Guideline. Tie rods make the final connection between the steering linkage and the steering arms. The point of connection with the steering linkage is considered the inner tie-rod end, and the end that connects to the steering arm is considered the outer tie-rod end. Checking tie rods is important in identifying steering problems because the ends are frequently damaged or worn. There are two basic types of tie-rod ends: spring loaded and preloaded. Each type has its own procedure for inspection and replacement of the ends. Replacement of tie-rod ends requires an alignment to be performed, or rapid tire wear will occur. Safely raise the vehicle on a lift. Inspect the rubber bellows for any signs of leaks, tears, or damage. With the vehicle raised, have an assistant turn the steering wheel to one side or the other and rock the steering wheel from side to side. On the side farthest out, squeeze the bellows until you make contact with the inner ball joint, and feel for any play in the inner tie-rod joint. Repeat this procedure for the other side. If play is found, replacement of the inner tie-rod ends will be necessary. Remove the front wheel for the side being replaced, and loosen the locknut on the tie-rod end. Remove the cotter pin and nut holding the outer tie-rod end to the steering arm, and separate the tie-rod end from the knuckle, using a tie-rod removal tool, the double hammer method, or a pickle fork. Count the number of turns to remove the outer tie-rod end from the threaded sleeve. Remove the spring clamp from the bellows boot end to the inner tie-rod shaft, and remove the crimp clamp from the bellows boot to the rack-and-pinion housing. A new crimp clamp will have to be used on replacement of the boot. Remove the bellows boot. Using an inner tie-rod tool and the specified wrench to hold the rack, loosen the inner tie rod from the rack, and remove the inner tie-rod end. Install the new inner tie rod in reverse order of removal, and verify that the play is gone. Perform alignment to reset toe after replacement is performed. Test drive to verify repair. Sway Bar Stabilizer Link Removing Guideline. The sway bar stabilizer components help prevent body roll when cornering. Although the stabilizer bar itself rarely gives any trouble, the rubber bushings on the bar and links wear out. This usually results in increased body roll as well as a clunking noise in the suspension. Safely raise the vehicle on a hoist, or use a jack and place safety stands under the frame. Remove the nut holding the stabilizer bar link. Remove the link by hand. Visually inspect the rubber link grommets for cracks, softness, brittleness, or wear. Repeat with the other link. Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. K620334-C, K620333-C, K90346-C, K90347-C. K90344-C, K90345-C, ES3600-C, ES3601-C, EV420-C. Ball Joint, Sway Bar, Outer Tie Rod, Inner Tie Rod, Control Arm. 4806906070, 4806806070 4334009010, 4334009080. Kit or Single Part. Cross Reference Part Number. OE Spec or Performance/Custom. Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. Virgin Islands, Northern Marianas, Guam are not deliverable. VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. Pack of 8 Square Ignition Coil For CHEVY GMC CADILLAC 5.3L 6.0L 8.1L 4.8L UF271. 2× Ignition Coil For Ford Ranger 2.3L 2.5L F150 Expedition Lincoln Mercury FD487. L+R For 99-07 Ford F250/F350/F450/F550 Chrome Power+Heat+Signal Tow Side Mirrors. 6 Ignition Coil Pack For Nissan Altima Maxima Quest Murano 3.5L V6 UF349 C1406. Catback Pipe + 4.5 Tip Muffler Catback Exhaust System For 02-07 Subaru Impreza. Removeable 3 Bar Van Set Roof Ladder Rack Heavy Duty Steel Car Top Carrier White. The item “For For 2002-2003 LEXUS ES300 All Models Control Arm Sway Bar Suspension Parts” is in sale since Thursday, December 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts”. The seller is “vap-autoparts” and is located in Ontario, California. This item can be shipped to United States.
- Brand: VAP-autoparts
- Manufacturer Part Number: VAP81313601L
- Interchange Part Number: K620334-C, K620333-C, K90346-C, K90347-C
- Other Part Number: K90344-C, K90345-C, ES3600-C, ES3601-C, EV420-C
- Included Hardware: Mounting Hardware
- Placement on Vehicle: Left
- Surface Finish: Premium Quality
- Kit Parts Included: Ball Joint, Sway Bar,Outer Tie Rod, Inner Tie Rod,Control Arm
- Partslink-number: 4806906070, 4806806070 4334009010, 4334009080
- Kit or Single Part: Kit
- Warranty: 10 Year
- Cross Reference Part Number: 2002 2003
- OE Spec or Performance/Custom: OE Spec
- Greasable or Sealed: Greasable
- Fitment Type: Direct Replacement
- Bundle Listing: Yes
- UPC: Does not apply
6 Pc Suspension Kit. Kit 4701 2 Front Sway Bar Link End 2 Front Lower Ball Joints 1 Front Lower Control Arm – Passenger Side 1 Front Lower Control Arm – Driver Side. 6 Pc Lower Control Arms Ball Joints Sway Bar for Toyota Corolla 03-13. While some of the parts we have grease fittings other parts come factory sealed, this does not affect the performance or quality of the parts. Due to the amount of sales we cannot guarantee which type you will receive. If we have the part available with the option you request it will be sent out that way. If not the part will be sent as we have it available. READ the notes on the compatibility chart. Exact items included in the listing are listed in the description. These charges must be borne by the recipient. We have no control over these charges and cannot predict what they might be. Mon-Thurs: 10:00am – 5:00pm. 10:00am – 4:00pm. The item “6 Pc Lower Control Arms Ball Joints Sway Bar for Toyota Corolla 03-13 All Models” is in sale since Sunday, May 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts”. The seller is “partsw-inc” and is located in Miami, Florida. This item can be shipped worldwide.
- Superseded Part Number: K80230 K90309 K640360 K640361
- Custom Bundle: Yes
- Interchange Part Number: vibe
- Kit or Single Part: Kit
- Control Arm Construction: Stamped
- Manufacturer Part Number: PW4701
- Part Type: Control Arm Kit
- Included Hardware: Mounting Hardware
- Placement on Vehicle: Left
- Other Part Number: 2004 2005 2006 2007 2008 2009 2012 2010 2011
- Brand: PartsW
- Fitment Type: Direct Replacement
- Warranty: Lifetime
- Bundle Description: 2 Front Sway Bar Link End
2 Front Lower Ball Joints
1 Front Lower Control Arm – Passenger Side
1 Front Lower Control Arm – Driver Side
These are the genuine Toyota Universal U Joint Kits for the following models. 2003 – 2009 4Runner 4WD. 2010 – 2017 4Runner (2WD or 4WD). 2007 – 2014 FJ Cruiser. 2003 – 2015 Land Cruiser (Front or Rear). 2002 – 2004 Sequoia 4WD. 1996 – 2004 Tacoma 4WD. This listing is for a quantity of 2 U-Joints. Royal South Toyota is your Authorized Toyota & Scion Parts Dealer. You are purchasing parts & accessories from Royal South Toyota Scion. Serving our Toyota customers since 1982 in beautiful Bloomington, Indiana. We understand what our customers expect and deserve. We strive for your complete satisfaction. Should you not be satisfied with your experience, please contact me directly and I will do my very best to meet your parts & accessory expectations. Royal South Toyota Scion. The item “Toyota U-Joint Spider Kit Set Genuine OEM OE 04371-60070 (Fit’s Many Models)” is in sale since Saturday, January 16, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Universal Joints & Driveshafts”. The seller is “royalsouthtoyotascion” and is located in Bloomington, Indiana. This item can be shipped to United States.
- Superseded Part Number: 0437160070
- Interchange Part Number: Tacoma 4Runner Sequoia Land Cruiser U-Joint
- Manufacturer Part Number: 04371-60070
- Placement on Vehicle: Front
- Other Part Number: FJ Cruiser
- Brand: TOYOTA
- Fitment Type: Direct Replacement
- Warranty: 1 Year
Welcome to Great Northern Clutch Queensland. “Clutch and flywheel experts”. HEAVY DUTY Clutch Kit for KUN16R KUN26R 3.0 Ltr 1KDFTV all models SUPER SALE! Fits Toyota Hilux KUN16R KUN26R 3.0 Ltr 1KDFTV – Fits all KUN16R and KUN26R models with the 1KD engine. This is the upgrade kit, do yourself a favour and go from 260mm to 275mm. Lasts longer and performs better. On heavy discount whilst stocks last! Blusteele Heavy duty clutch kit advantages. Blusteele Heavy Duty clutch kits are purpose engineered for vehicles carrying loads or for light performance use. They are also prime choice for those who desire a premium clutch, or for anyone with a passion for using quality products in their vehicle. Genuine Blusteele Heavy Duty clutch kit, complete with the following parts. Heavy Duty Pressure Plate. Heavy Duty Organic Friction Plate. Please note – all pictures and photos are for illustration purpose only. The item you receive may look different and or not have what is pictured. We are an independent clutch kit and flywheel specialist store. Our team can help you choose the correct clutch kit and or flywheel to suit your specific application. Please send us your Registration details and or VIN number. We sell all the major clutch brands including Exedy, Blusteele, Mantic & Xtreme. Whether it be you daily driver, track car or bush trekker, please let us help you find the right clutch kit for you. We are also hoping to soon have a warehouse in North Queensland to help our valued customers get faster service. We fully understand that mistakes happen and you may need to return you clutch kit for on reason o another. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Heavy Duty Clutch Kits. 4 x 4 Clutch Kits. Get in touch with us. Great Northern Clutch Archerfield, Queensland 4108. Listing and template services provided by inkFrog. The item “HEAVY DUTY Clutch Kit for KUN16R KUN26R 3.0 Ltr 1KDFTV all models SUPER SALE” is in sale since Wednesday, November 14, 2018. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Transmission\Clutches”. The seller is “great_northern_clutch_co_qld” and is located in Brisbane. This item can be shipped worldwide.
- MPN: BTA-9276
- Manufacturer Part Number: BTA-9276
- Brand: Blusteele
Welcome to Great Northern Clutch Queensland. “Clutch and flywheel experts”. SURVIVOR heavy duty 4X4 Clutch kit inc FLYWHEEL for HILUX KUN26R 1KD all models. Fits all KUN16 & KUN26 models with the 1KD 3.0 litre turbo diesel engine. Comes with an Upgraded claw grooved flywheel for ultimate heat dissipation! Blüsteele Survivor 4X4 edition clutch kits are purpose engineered for vehicles weighted carrying loads or for off road performance use. They are also a great choice for those who desire a premium clutch, or for anyone with a passion for using quality products in their vehicle. Genuine Blusteele Survivor Duty clutch kit, complete with the following parts. Survivor 4X4 Nci Pressure Plate. Survivor kevlar mix organic Friction Plate. Surviror Claw Grooved Upgraded Flywheel. Hight Tenisle 12.9 bolts for pressure plate. Please note – all pictures and photos are for illustration purpose only. The item you receive may look different and or not have what is pictured. We are an independent clutch kit and flywheel specialist store. Our team can help you choose the correct clutch kit and or flywheel to suit your specific application. Please send us your Registration details and or VIN number. We sell all the major clutch brands including Exedy, Blusteele, Mantic & Xtreme. Whether it be you daily driver, track car or bush trekker, please let us help you find the right clutch kit for you. We are also hoping to soon have a warehouse in North Queensland to help our valued customers get faster service. We fully understand that mistakes happen and you may need to return you clutch kit for on reason o another. Join Our Exclusive Newsletter For Up To Date News, Special Offers And New Arrivals. Heavy Duty Clutch Kits. 4 x 4 Clutch Kits. Get in touch with us. Great Northern Clutch Archerfield, Queensland 4108. Listing and template services provided by inkFrog. The item “SURVIVOR heavy duty 4X4 Clutch kit inc FLYWHEEL for HILUX KUN26R 1KD all models” is in sale since Sunday, July 12, 2020. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Transmission\Clutches”. The seller is “great_northern_clutch_co_qld” and is located in Brisbane. This item can be shipped worldwide.
- Manufacturer Part Number: BTA-9276-SS
- Brand: Blusteele
- Warranty: 1 Year / 20,000 KMS (whichever occurs first)
Replacement Auto Body Repair. Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs – an OE replacement product for your damaged or aged factory part. Replacement – the most affordable brand name for replacement parts that you need! Replacement is a professional brand for autobody, lighting parts, electrical, brake, suspension, intake and exhaust, and cooling and heating products. For Models Made In Japan Or USA; Location : Front. Brand New in the Box – Fit and Quality Guaranteed! Bumper cover recommended use. Bumper cover license plate provision. Without license plate provision. Bumper cover parking aid sensor holes. Without parking aid sensor holes. Bumper cover fog light holes. With Fog Light Holes. Bumper cover receiver and tow hook hole. Without tow hook hole. 5211906919, TO1000329, 5311206010, TO1036103, 5311106090C0, TO1200288. (1) Bumper Cover, (1) Bumper Grille, and (1) Grille. Bumper cover product fit. Grille assembly recommended use. Bumper cover prop 65 warning. WARNING: This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to. Compatible with the following vehicles. The item “Bumper Cover Kit For 2007-2009 Camry For Models Made In Japan Or USA 3pc” is in sale since Tuesday, August 13, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Bumpers & Parts”. The seller is “carpartswholesale” and is located in La Salle, Illinois. This item can be shipped to United States.
- Brand: Perfect Fit
- Bumper Cover License Plate Provision: Without license plate provision
- Bumper Cover Parking Aid Sensor Holes: Without parking aid sensor holes
- Bumper Cover Product Fit: Direct Fit
- Bumper Cover Receiver And Tow Hook Hole: Without tow hook hole
- Bumper Cover Recommended Use: OE Replacement
- Bumper Cut-outs: Fog Light Cut-out
- Bumper Grille Color/Finish: Textured Black
- Bundle Description: – One (1) Front Bumper Cover [Front] – One (1) Center Bumper Grille [Center] – One (1) Grille Assembly
- Bundle Listing: Yes
- Color/Finish: Unfinished
- Components: (1) Bumper Cover, (1) Bumper Grille, and (1) Grille
- Custom Bundle: Yes
- Fitment Type: Direct Replacement
- Grille Assembly Color/Finish: Black
- Grille Assembly Recommended Use: OE Replacement
- Grille Assembly Type: Grille
- Interchange Part Number: 5211906919
- Manufacturer Part Number: 14426032
- Material: Plastic
- OE Number: 5211906919, 5311206010, 5311106090C0
- Other Part Number: 5211906919, 5311206010, 5311106090C0
- Part Link Number: TO1000329, TO1036103, TO1200288
- Part Name: Auto Body Repair
- Placement on Vehicle: Front
- Superseded Part Number: 5211906919
- UPC: Does Not Apply
- Warranty: 1-year unlimited-mileage warranty
H11 8000K XENON CANBUS HID KIT TO FIT Toyota Prius MODELS. XENON HID CONVERSION KIT. CANBUS & NON-CANBUS COMPATIBLE. Complete with the Latest Slimline Digital Ballasts. HEADLIGHT – DIPPED BEAM. NO FLICKER OR WARNING LIGHTS. SUITABLE WITH OR WITHOUT CANBUS. By increasing the light output on the road (upto 300%) our HID Kit makes driving a night and low light, or poor driving conditions, A far safer task. You get to see more, allowing you to react better and make better judgements. With an increased lifespan and more resilient bulbs our HID KITS will last a lot longer that others, With spare parts readily available should they be needed in the future. Plug & Play Design. Kit Supplied is suitable for the vehicles mentioned. Check compatibility chart above for full details. Kit supplied to Replace the dipped beam (Usual driving lights) bulbs on the cars as mentioned. Complete kit – includes. 2x Xenon HID BULBS. 2x Slimline Digital Ballasts. (Suitable for Canbus & Non-Canbus systems). Fitting Is a direct replacement of your old bulbs, Their is no special modifications needed to the vehicle or headlights. We do recommend you get a professional to fit the HID Kit, but any competent DIY’er should have no trouble. The kit can be easily removed when no longer needed or transfering to a new car. Please note the Kelvin colour listed in the TITLE will be the one receive – check our shop if you require a different fitting or Colour. We are dedicated to ensuring the highest possible quality service to our customers. Don’t forget to regularly visit our store as we are constantly adding new products, special offers and unbeatable deals to our listings! The item “H11 8000K XENON CANBUS HID KIT TO FIT Toyota Prius MODELS” is in sale since Wednesday, January 15, 2014. This item is in the category “Vehicle Parts & Accessories\Car Parts\External Lights & Indicators\Bulbs & LEDs”. The seller is “car_parts_international” and is located in Newtownards. This item can be shipped worldwide.
- Brand: ASC
- Bulb Type: H11
- Colour Temperature: 8000k
- EAN: does not apply
- HID Lamp Power: 35 W
- Interchange Part Number: 711
- Manufacturer Part Number: C-HID-H11-8k-ToDPm
- Placement on Vehicle: Front
H7 15000K XENON CANBUS HID KIT TO FIT Toyota Celica MODELS. XENON HID CONVERSION KIT. CANBUS & NON-CANBUS COMPATIBLE. Complete with the Latest Slimline Digital Ballasts. HEADLIGHT – DIPPED BEAM. NO FLICKER OR WARNING LIGHTS. SUITABLE WITH OR WITHOUT CANBUS. By increasing the light output on the road (upto 300%) our HID Kit makes driving a night and low light, or poor driving conditions, A far safer task. You get to see more, allowing you to react better and make better judgements. With an increased lifespan and more resilient bulbs our HID KITS will last a lot longer that others, With spare parts readily available should they be needed in the future. Plug & Play Design. Kit Supplied is suitable for the vehicles mentioned. Check compatibility chart above for full details. Kit supplied to Replace the dipped beam (Usual driving lights) bulbs on the cars as mentioned. Complete kit – includes. 2x Xenon HID BULBS. 2x Slimline Digital Ballasts. (Suitable for Canbus & Non-Canbus systems). Fitting Is a direct replacement of your old bulbs, Their is no special modifications needed to the vehicle or headlights. We do recommend you get a professional to fit the HID Kit, but any competent DIY’er should have no trouble. The kit can be easily removed when no longer needed or transfering to a new car. Please note the Kelvin colour listed in the TITLE will be the one receive – check our shop if you require a different fitting or Colour. We are dedicated to ensuring the highest possible quality service to our customers. Don’t forget to regularly visit our store as we are constantly adding new products, special offers and unbeatable deals to our listings! The item “H7 15000K XENON CANBUS HID KIT TO FIT Toyota Celica MODELS” is in sale since Wednesday, January 15, 2014. This item is in the category “Vehicle Parts & Accessories\Car Parts\External Lights & Indicators\Bulbs & LEDs”. The seller is “car_parts_international” and is located in Newtownards. This item can be shipped worldwide.
- Brand: ASC
- Bulb Type: H7
- Colour Temperature: 15000k
- EAN: does not apply
- HID Beam Type: Lo
- HID Lamp Power: 35 W
- Interchange Part Number: 477
- Manufacturer Part Number: C-HID-H7-15k-VaDPp
- Placement on Vehicle: Front
