PSI Auto Restyling OE Style Fender Flares. PSI Auto Restyling OE Style Fender Flares Provide an Subtle Complement to Your Vehicle’s Overall Styling. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 2.5″ Rear 2.5″. Additional Tire Coverage: Front 1.0″ Rear 1.0″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8000913
- Height of Flares: Front 2.5\
- Additional Tire Coverage: Front: 1.0\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: OE
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028288
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020924
- Height of Flares: Front 5.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): Excludes Limited Models
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Rivet / Pocket Bolt
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota 4Runner 2014-2021
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028707
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030924
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Shipping: free Shipping to 48 Continental United States
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 5.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): Excludes Limited Models
- Fitment: Fits Toyota 4Runner 2014-2021
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887027878
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will Not Fit Crew Cab Models. Not Compatible with Flareside Models. Height of Flares: Front 3.0″ Rear 3.0″. Additional Tire Coverage: Front 1.75″ Rear 1.75″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Important Note (2): Not Compatible with Crew Cab Models
- Important Note (3): Not Compatible w/ Flareside Models
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Height of Flares: Front 3.0\
- Additional Tire Coverage: Front: 1.75\
- Fitment: Fits Toyota Tundra 2003-2006
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Rivet; Pocket Bolt
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Shipping: Free Shipping to 48 Continental United States
- Pieces in Set (6): RF, RF-1, LF, LF-1, RR, LR
- Important Note (1): For 98.2\
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020914
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028714
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020913
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Bolt ; Pocket Rivet
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028431
Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE OE Style Fender Flares Toyota Tundra 07-13 Fits w/ Factory Flaps. OE Style FENDER FLARES Make: Toyota Model: TUNDRA. No Cracking and No Chalking! Finish: Flares come in a PAINTABLE BLACK FINISH, and it can be painted to match color of vehicle What comes with this listing: 1 A set of 4 Fender Flares 2 All necessary mounting hardware including seals and screws 3 Detailed instruction sheet for installation 4 Flares arrive ready for installation Descriptions of Pictures Figure 1 and 4 are used to help you picture what the flares would look like on an actual vehicle. Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Paintable Black Matte Finish. Flare Height: Front 5.25″ ; Rear 5.25″. Tire Coverage: Front 1.25″ ; Rear 1.25″. Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: OE
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installatiom: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- IMPORTANT NOTE (1): Fits Models with Factory Mudflaps ONLY
- Flare Height: Front 5.25\
- Tire Coverage: Front 1.25\
- Color: Black Paintable to Color Match
- Finish: BLACK PAINTABLE Matte
- Manufacturer Part Number: 800-0901
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Yes
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will Not Fit Crew Cab Models. Not Compatible with Flareside Models. Height of Flares: Front 3.0″ Rear 3.0″. Additional Tire Coverage: Front 1.75″ Rear 1.75″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Important Note (1): For 98.2\
- Important Note (2): Not Compatible with Crew Cab Models
- Important Note (3): Not Compatible w/ Flareside Models
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Height of Flares: Front 3.0\
- Additional Tire Coverage: Front: 1.75\
- Fitment: Fits Toyota Tundra 2003-2006
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Shipping: Free Shipping to 48 Continental United States
- Pieces in Set (6): RF, RF-1, LF, LF-1, RR, LR
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030914
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028783
Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE Pocket Rivet Bolt Fender Flares 2016 Toyota Tacoma Complete Set. Pocket Bolt Style FENDER FLARES Make: Fits Toyota Model: Fits Tundra For Both 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will not Fit Crew Cab Models. Not Compatible w/ Flareside Models. No Cracking and No Chalking! Finish: Flares come in a BLACK PAINTABLE FINISH, and it can be painted to match color of vehicle What comes with this listing: 1 A set of 4 Fender Flares 2 All necessary mounting hardware including seals and screws 3 Detailed instruction sheet for installation 4 Flares arrive ready for installation Description of Pictures Figure 1 shows what the flares would look like on an actual vehicle Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Black Paintable Finish. Flare Height: Front 3.0″ ; Rear 3.0″. Tire Coverage: Front 1.5″ ; Rear 1.5″ Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: Pocket Rivet; Pocket Bolt
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installation: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- IMPORTANT NOTE (1): For 98.2\
- Flare Height: Front 3.0\
- Tire Coverage: Front 1.5\
- IMPORTANT NOTE (2): Not Compatible with Crew Cab Models
- Color: Black Paintable to Color Match
- Finish: BLACK PAINTABLE Matte
- Manufacturer Part Number: 802-0914
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Yes
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030913
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028240
Pocket Rivet / Bolt Style. Cut Round Rivet / Bolt Style. Pop-Out Rivet / Bolt Style. Add to Favorite Sellers. Sign up to Newsletter. BLACK PAINTABLE OE Style Fender Flares Toyota Tundra 07-13 Fits w/ Factory Flaps. OE Style FENDER FLARES. Will Fit Models with Factory Mudflaps. For 66.7″, 78.7″, and 97.6 Fleetside ONLY. Made from UV protected OEM approved ABS material. OEM quality and no drill affixing! No Cracking and No Chalking! Finish: Flares come in a BLACK PAINTABLE FINISH, and it can be painted to match color of vehicle. What comes with this listing. 1 A set of 4 Fender Flares. 2 All necessary mounting hardware including seals and screws. 3 Detailed instruction sheet for installation. 4 Flares arrive ready for installation. Figure 1 is a model used to help you picture what the flares would look like on an actual vehicle. Figure 2 displays all 4 flares as well as the complete hardware kit. Figure 3 displays the Paintable Black Matte Finish. Flare Height: Front 4.0″ ; Rear 4.25″. Tire Coverage: Front 2.0″ ; Rear 2.0″. Note: vehicles with emblem may require relocation of the emblems. PRE-FITTING BEFORE INSTALLATION AND PROFESSIONAL INSTALLATION ARE BOTH HIGHLY RECOMMENDED. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Modified Item: No
- Custom Bundle: No
- Material: High Quality Heavy Duty ABS Virgin Plastic
- Style: OE
- Pieces in Set: 4 (RF, LF, RR, LR) FULL SET
- Installatiom: Inner Wheel Well ; NO DRILLING ON FENDER SIDE
- Shipping Fee: Free Shipping to 48 Continental United States
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content Included (2): Complete Hardware Kit
- Fast Ship Time: Same Day Shipping before 12 PM CST
- Color: Black Paintable to Color Match
- Finish: BLACK PAINTABLE Matte
- Manufacturer Part Number: 800-0904
- IMPORTANT NOTE (1): Will Fit Models with Factory Mudflaps
- IMPORTANT NOTE (2): For 66.7\
- Flare Height and Tire Coverage: Front (H=4.0\
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Non-Domestic Product: No
- Manufacturer Warranty: Yes