July 22, 2023
Aoshima Mode Parfume UCF31 Toyota Celsior Late Style 1/24 Model 042373
Mode Parfume UCF31 Toyota Celsior Late Style 1/24 Model. Super VIP #042373 by Aoshima Bunka Kyozai. BRAND NEW AND COMPLETE. Mode Parfume UCF31 Toyota Celsior Late Style. Tracking # included upon label creation.
February 3, 2023
Sand Blast Textured Extension Style Fender Flares Fits Toyota Tundra 2003-2006
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For 98.2″, 76.5″, 76.1″, 74.7″, and 74.3 Fleetside. Will Not Fit Crew Cab Models. Not Compatible with Flareside Models. Height of Flares: Front 3.0″ Rear 3.0″. Additional Tire Coverage: Front 1.75″ Rear 1.75″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Features: Easy Installation, No Drilling Required
- Manufacturer Warranty: Limited Lifetime Warranty
- Additional Content Included (2): Complete Hardware Kit
- Vintage Part: No
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Important Note (2): Not Compatible with Crew Cab Models
- OE/OEM Part Number: A8030914B
- Performance Part: No
- Important Note (3): Not Compatible w/ Flareside Models
- Shipping: Free Shipping to 48 Continental United States
- Material: High Impact Resistant Virgin ABS Material
- Universal Fitment: No
- Additional Tire Coverage: Front: 1.75\
- Attachment Type: Attached to Fender via Inner Wheel Well
- Pieces in Set (6): RF, RF-1, LF, LF-1, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Finish: Black Sand Blast Textured Finish
- Fitment: Fits Toyota Tundra 2003-2006
- Additional Content Included (1): Complete Roll of Rubber Seal with 3M Tape
- Manufacturer Part Number: A8030914B
- Brand: PSI Auto Restyling
- Style: Extension
- Color: Black, Not Meant to Be Painted
- Important Note (1): For 98.2\
- Height of Flares: Front 3.0\
- Type: Fender Flares
- UPC: 812887027038
January 5, 2023
AOSHIMA 1/24 Boxy Style Toyota Hiace Super GL’10 Plastic Model Kit Rare New
AOSHIMA 1/24 Boxy Style Toyota Hiace Super GL’10 Plastic Model Kit Rare New. International Buyers – Please Note. This item is in the category “Toys & Hobbies\Models & Kits\Automotive”. The seller is “imiura” and is located in this country: JP. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.
- Character: Hiace
- Model: Hiace
- Country/Region of Manufacture: Japan
- Custom Bundle: No
- Material: Plastic
- Theme: Transportation
- Scale: 1:24
- Assembly Status: Unassembled Kit
- Type: Model Kit
- Customized: No
- Color: White
- Vintage: No
- Subject: Toyota
- Age Level: 12-16 Years
- Brand: AOSHIMA
- Set Includes: Automotive
- Unit of Sale: Lot
- Skill Level: 3 – Intermediate
- Franchise: Aoshima
January 4, 2023
Toyota Supra MK4 BN Sports Style Widebody Kit for Tamiya Solido 124 118 110
Patience, Skills, Sanding, Cutting and Materials like putty or glue may be required to fit this unique item and create an even more unique model car. Cutting parts of your model car may be required to fit this kit. Wheels are Not Included – We can make any wheel in any size at an additional cost, leave a message if you are interested. Printed using ABS-like Resin which is much stronger than the typical brittle resin. Highly Detailed 3D Model. Printed Using Professional 3D Printer Capable of Producing. Comes Washed and Cured with Removed Print Supports – Ready for Painting. As with all 3D printed parts some priming, sanding or modelling putty may be required to achieve smooth finish or fit some parts, depending on the product and the desired final result. We are happy to share our passion with our customers. We look at our clients as our friends and we are 100% dedicated to providing the best products and service. In case of any trouble just send us a message and we will do our best to sort it out for you! Custom Parts and Products. We can also offer custom acrylic display cases with a leather base to showcase your work Sky is the limit! This item is in the category “Toys & Hobbies\Models & Kits\Automotive”. The seller is “micron.art” and is located in this country: BG. This item can be shipped to United States, all countries in Europe, Mexico, Japan, Brazil, Canada, Australia.
- Scale: 1:8
- Brand: Micron Art
- Assembly Status: Unassembled Kit
- Type: Model Kit
- Theme: Transportation
- Material: Resin
- Features: Finescale, Not Painted
- Subject: Toyota
- Item Weight: 0.5 lb
January 3, 2023
Textured Extension Style Fender Flares Fits Toyota 4Runner 2014-2021 Full Set
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States.
- Features: Easy Installation, No Drilling Required
- Manufacturer Warranty: Limited Lifetime Warranty
- Vintage Part: No
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- OE/OEM Part Number: A8030924B
- Performance Part: No
- Shipping: Free Shipping to 48 Continental United States
- Additional Content (2): Complete Hardware Kit Included
- Material: High Impact Resistant Virgin ABS Material
- Universal Fitment: No
- Additional Tire Coverage: Front: 1.5\
- Attachment Type: Attached to Fender via Inner Wheel Well
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Placement on Vehicle: Left, Right, Front, Rear
- Finish: Black Sand Blast Textured Finish
- Fitment: Fits Toyota 4Runner 2014-2021
- Manufacturer Part Number: A8030924B
- Brand: PSI Auto Restyling
- Style: Extension
- Color: Black, Not Meant to Be Painted
- Important Note (1): Excludes Limited Models
- Height of Flares: Front 5.25\
- Type: Fender Flares
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- UPC: 812887027922
November 25, 2022
OE Style Fender Flares Fits Toyota Tacoma 95-04 Complete Set Paintable
PSI Auto Restyling OE Style Fender Flares. PSI Auto Restyling OE Style Fender Flares Provide an Subtle Complement to Your Vehicle’s Overall Styling. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 2.5″ Rear 2.5″. Additional Tire Coverage: Front 1.0″ Rear 1.0″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8000913
- Height of Flares: Front 2.5\
- Additional Tire Coverage: Front: 1.0\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: OE
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028288
October 27, 2022
Paintable Pocket Bolt Style Fender Flares Fits Toyota 4Runner 2014-2021 Full Set
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020924
- Height of Flares: Front 5.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): Excludes Limited Models
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Rivet / Pocket Bolt
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota 4Runner 2014-2021
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028707
October 26, 2022
Paintable Extension Style Fender Flares Fits Toyota 4Runner 2014-2021 Full Set
PSI Auto Restyling Extension Style Fender Flares. PSI Auto Restyling Extension Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. Height of Flares: Front 5.25″ Rear 5.5″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (6 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Material: High Impact Resistant Virgin ABS Material
- Style: Extension
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8030924
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (6): RF, LF, RR, RR-1, LR, LR-1
- Shipping: free Shipping to 48 Continental United States
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Height of Flares: Front 5.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): Excludes Limited Models
- Fitment: Fits Toyota 4Runner 2014-2021
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887027878
September 27, 2022
Pocket Bolt Style Fender Flares Fits Toyota Tacoma 95-04 Sand Blast Textured Fsh
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Sand Blast Textured Finish and Is Not Meant To Be Painted. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black, Not Meant to Be Painted
- Finish: Black Sand Blast Textured Finish
- Manufacturer Part Number: A8020913B
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Bolt ; Pocket Rivet
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028745
September 26, 2022
Pocket Bolt Style Fender Flares Fits Toyota Tacoma 95-04 Full Set Paintable
PSI Auto Restyling Pocket Bolt Style Fender Flares. PSI Auto Restyling Pocket Bolt Fender Flares Provide an Aggressive Complement to Your Vehicle’s Oversize Tires and Lift Kits. These Flares can Also Provide Ability to Cover Up Rust and Other Blemishes While Preventing Further Damage From Road Debris and Other Elements. IMPORTANT FITMENT INFORMATIONPLEASE READ CAREFULLY. For Both 61.5″ and 74.5″ Fleetside. Compatible w/ 4WD Models Only. Not Compatible w/ Flareside Models. Will Not Cover Factory Flare Holes. If You Currently Have Fender Flares Installed on Your Tacoma, Please Remove Existing Fender Flares to See if Existing Holes are on Fender Panel. If Holes are on the Fender, This Set Will Not Cover Those Holes. Height of Flares: Front 3.25″ Rear 3.25″. Additional Tire Coverage: Front 1.5″ Rear 1.5″. High Impact Resistant Virgin ABS Material For Durability; UV Protected Flares. Flares Come in a Black Paintable Finish and Can Be Prepped and Painted to Color Match Vehicle if Desired. All Necessary Installation/Decorative Hardware and Seals are Included. The Seals Will Be Applied to the Bottom of the Top Edge of Every Fender Flare. Rivets are Decorative and Nonfunctional. No Drilling On Fender Side Required. Complete Set of Front and Rear Flares (4 Pieces). Note: Vehicles With Emblem(s) may Require the Removal or Relocation of the Emblem(s). Test Fitting and Professional Installation are Always Recommended. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “psi_restyling” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Additional Content (1): Complete Roll of Rubber Seal with 3M Tape
- Additional Content (2): Complete Hardware Kit Included
- Color: Black; Can Be Prepped and Painted to Color Match
- Finish: Paintable Black Finish
- Manufacturer Part Number: A8020913
- Height of Flares: Front 3.25\
- Additional Tire Coverage: Front: 1.5\
- Important Note (1): For Both 61.5\
- Important Note (2): Compatible w/ 4WD Models Only
- Important Note (3): Not Compatible w/ Flareside Models
- Important Note (4): Will Not Cover Factory Flare Holes
- Material: High Impact Resistant Virgin ABS Material
- Style: Pocket Bolt ; Pocket Rivet
- Installation: Inner Wheel Well, No Drilling on Fenders Required
- Pieces in Set (4): RF, LF, RR, LR
- Placement on Vehicle: Left, Right, Front, Rear
- Brand: PSI Auto Restyling
- Shipping: Free Shipping to 48 Continental United States
- Fitment: Fits Toyota Tacoma 1995-2004
- Manufacturer Warranty: Limited Lifetime Warranty
- UPC: 812887028431