With heavy-duty components and a high-clearance design, this kit offers aggressive looks, unparalleled off-road performance, and enough ride height to run up to 33×12.50in tires. Instantly gain a meaner lifted and level stance with high-quality equipment that’s made to handle the hazards of high-performance while withstanding the test of time. A set of durable lifted knuckles, high-clearance front and rear crossmembers, upper strut spacers, Skid Plate, and long-lasting, fabricated rear blocks give you plenty of lift and uncompromised toughness. Installation time is aprox 6-8 hours. Front: Lifted knuckles, front and rear crossmembers, upper strut spacers, steering stops, brake line brackets, skid plates, differential drop brackets, bumpstop brackets, sway-bar relocation brackets, and lower skid plate. Rear: Fabricated lift blocks, u-bolts, carrier bearing shims, shock brackets, brake line brackets and a pair of N2.0 Performance series shocks. Notes: Does NOT fit XSP-X or T/X Baja models WIll not fit 5-lug 2wd models. Minor cutting and drilling is required. Clears 33×12.5 tire with proper offset wheels. Benefits: Easy bolt-on Installation Unmatched ground clearance due to high clearance crossmember design. 100% precision laser cut materials using latest Computer aided design process. No strut disassembly or strut compressor required for installation. Fits 4wd models and 2wd Pre-Runner 6-lug models. Fabricated blocks are stronger and offer a longer lifespan than cast blocks. Many other Jeep Tires, Wheels, Suspension Lifts, Performance Products and much more available. The item “2005-2015 Toyota Tacoma 6 Suspension Kit (Fits 4wd and 2wd PreRunner models)” is in sale since Monday, June 13, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “grandcanyon4x4″ and is located in Cave Creek, Arizona. This item can be shipped to United States.
- Manufacturer Part Number: 747.20
- Warranty: Lifetime
- Brand: Rough Country
- Kit or Single Part: Kit
With heavy-duty components and a high-clearance design, this kit offers aggressive looks, unparalleled off-road performance, and enough ride height to run up to 33in tires. Instantly gain a meaner lifted and level stance with high-quality equipment that’s made to handle the hazards of high-performance while withstanding the test of time. A set of durable lifted knuckles, high-clearance front and rear crossmembers, upper strut spacers, and long-lasting, fabricated rear blocks give you plenty of lift and uncompromised toughness. This all-inclusive kit features everything you need to take your Tundra off the tread and through the trenches; featuring steering stops, brake line brackets, differential drop brackets, sway-bar drop brackets, and anything else one would need to keep everything working at optimum angles after lifting. Best of all, you can get up and running with Rough Country’s 4.5in Toyota Tundra Lift at a price that won’t break the bank! This Rough Country 4.5 Suspension lift for your Toyota Tundra will give your Tundra a new look and allow you to run taller tires for that agressive look. When installed this kit will accomodate 33″ tall tires on 18″ or larger rims with the proper offset. Installation time is aprox 6-7 hours. Front: Lifted knuckles, front and rear crossmembers, upper strut spacers, steering stops, brake line brackets, differential drop brackets, bumpstop brackets, sway-bar drop brackets, and lower skid plate. Rear: Fabricated lift blocks, u-bolts, e-brake and brake line brackets and a pair of N2.0 Performance series shocks. Notes: Does NOT fit XSP-X models, TRD Pro Series models or Rock Warrior models. Minor cutting and drilling is required. Carrier bearing bracket is required on vehicles equipped with two-piece driveshaft. 18in or larger wheels are required. Clears 33×12.5×18 tire on a 18×8.5 wheel with a minimum backspacing of 6 3/16 Stock wheels can be used but can accommodate tires no wider than 11.5in Please view instructions. For complete information on proper tire / wheel combinations. Benefits: Unmatched ground clearance due to high clearance crossmember design. 100% precision laser cut materials using latest Computer aided design process. Requires no modification to the stock differential mounts, drivetrain or exhaust. Fits both 2wd / 4wd models Fabricated blocks are stronger and offer a longer lifespan than cast blocks. Many other Jeep Tires, Wheels, Suspension Lifts, Performance Products and much more available. The item “2007-2015 Toyota Tundra 4 Suspension Kit (Fits 2 or 4wd models)” is in sale since Friday, August 02, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “grandcanyon4x4″ and is located in Cave Creek, Arizona. This item can be shipped to United States.
- Manufacturer Part Number: 75320
- Warranty: Lifetime
- Brand: Rough Country
- Kit or Single Part: Kit
The Rough Country 3 Tacoma lift is a simple and economically price way to fit a little larger tire under your Tacoma. The front uses a pair of strut extensions and the rear is lifted with a pair of 2 lift block with U-bolts and a pair of N2.0 shocks. Installation time is aprox 2-3 hours. Notes: Does NOT fit XSP-X, T/X Baja or 5-lug models. Minor cutting and drilling is required. Clears 265/70 R tires with proper offset wheels. Benefits: Easy bolt-on Installation No strut disassembly or strut compressor required for installation. Fits 4wd models and 2wd Pre-Runner 6-lug models. Many other Jeep Tires, Wheels, Suspension Lifts, Performance Products and much more available. The item “3 Suspension Kit, 2005-2017 Toyota Tacoma (Fits 4wd and 2wd PreRunner models)” is in sale since Friday, August 02, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “grandcanyon4x4″ and is located in Cave Creek, Arizona. This item can be shipped worldwide.
- Manufacturer Part Number: 745N2
- Warranty: Yes
- Brand: Rough Country
This is a brand new BOSS air bag load assist kit to suit rear of. Toyota Hilux 2WD from really old to new current 2016+ model. If you carry heavy loads at all you should consider heavier springs of some sort. But the problem with heavier springs is that when you don’t have a load they are rock hard and not only does it feel terrible but the car handles poorly. If your load varies you need soft suspension when you don’t carry a load and heavy suspension when you do have a load. Cant manage that with heavier leaf springs. The only real way to achieve this is with air bags just like those in trucks and buses. With a BOSS Air Bag Load Assist kit you can run them deflated when you are running light weight without a load and basically they aren’t there. Then just pump them up when you load up. The heavier the load the more air you can apply. Ealistically you only need 20 to 40 psi for normal heavy loads and maybe 80 psi with extreme loads but the bags are tested to 400 psi and 50 tonnes of compress pressure per bag in manufacture. You could say the bags are over engineered and capable of exceeding your load carrying expectations by a long way. We can also do tanks for tyres or digital displays. Lets quickly kick a few goals.. You can run these flat and they will be ok. Normal operating pressures are just like your tyres – 25 psi to 50 psi for normal descent loads. The rubber in our BOSS bags is heavier than the rubber in your tyres. They never get damaged by stones or sticks. You can carry what ever load you want at what ever height you want, even if the car is normally lowered. Load up more weight on the tow ball by shifting trailer weights forward and have a safer ride. Individual components like a bag are all replaceable. No drilling welding or cutting – a normal socket set is all you need. We are Australian and now have over 25,000 customers all over Aus. We do virtually every Ute, 4WD or Van and pride ourselves in not copying others. We speak with roo shooters, caravaners, tradies, farmers and alike all over Aus all day everyday. We also look after workshops and resellers. We are here to help. What lots of customers do is take a leaf or 2 out of their rear leaf pack. This softens up the ride to softer than standard. Then run a few pounds to suit your liking in the bags. Now you are running on air, even without a load. But you will find when you are unloaded that by running a few pounds in the bags just takes away the body roll and people love that. So there’s another reason to by these bags. The kit is complete. Brackets top and bottom. Air Bags x 2 (1 for each side). Air Fittings for air lines. Easy to follow instructions with pics. The steel brackets are laser cut, mig welded and powder coated black with the appropriate preparations for best adhesion and anti corrosion. We are phasing out the electroplating. Powder coating looks better, lasts longer and the process is better for the environment. The kit exceeds Australian Design Rule (ADR) standards. Here’s how easy they are to fit – anyone can do this.. Bolt up air bag to top and bottom mounts. Jack up and support weight of car’s chassis (You can leave wheels on the ground). Remove Bump Stop from Chassis and bolt top mount to Bump Stop Bracket. Loosen “U” bolts clamping rear leaf pack to rear axle. Slide bottom mount under “U” bolt then tighten “U” Bolts. Attach air fitting to bag plate and run air lines to somewhere handy. That’s all there is to it. Essentially you can lift the rear of the vehicle with air bags to level when otherwise sagging in the rear. You can avoid your headlights blinding oncoming drivers when your rear end sags. Shocks, tyres and leaf springs will last longer too. If you are towing you can now shift more weight forward on the trailer or in the caravan and that makes for a much safer and steady ride. RACV, RACQ, NRMA, AAMI for example are all happy with our bag options. Any old air compressor will pump these up. Could be at a servo, a workshop compressor or a 12V cig lighter compressor. But it’s really cool to mount a compressor and air tank on board so you can adjust your air bags with the flick of a switch. See below for in cab options. Note the in cab kits below are traditionally for 2 x bags but for a little extra we can work out a great price to do all 4 bags if you get bags for the front as well. We have 3 In Car Kits to choose from… PX01 In Cab is our newest and now most popular. PX02 is same as PX01 but with our larger PX02 compressor.. Our PX07 In Cab Kit is the most comprehensive with our big PX07 compressor and tank also great for pumping tyres, running air horns and tools.. And with each of these kits we can upgrade to fully electronic with LED digital display and electric valves and apart from looking really great also eliminates the need for running air lines inside the car.. With this upgrade we take out the twin needle gauge and the 2 manual dump valves and replace them with the following.. 1 x LED Digitial Gauge – twin read out. 1 x Mounting plate. 2 x air down electric solenoids with 1/4 T-piece. 2 x push button switches to activate the solenoids. 2 x sender units with 1/4 T-piece. All of our gear may be picked up from our official BOSS development center in Labrador on the Gold Coast or we can send anywhere in Aus for Free (or with express options) or Worldwide at affordable rates. Almost every air bag application we do is bolt in. No welding or cutting or drilling. We make that a mandatory requirement when we develop a new kit. And we will make sure we do better. We wont be beaten on price, quality or service. Happy customers is our key to success. People often ask why or how are we so much cheaper than Firestone. So our costs are way down and if we charged Firestone prices we would be ripping you off. Our bags are not permanently attached to the mounting brackets. That means you can replace a bag if you have to without the costly new brackets as well. No need for qualified installers, anyone can fit our gear, its easy and there’s no crazy ideas of how long 5 years is. The way we see it, if you are happy you will tell your friends and our next customer could be one of your mates. So even in 15 years we are still going to look after you. It’s how we roll. I sell brackets and bags individually to people who change cars or need spares. Consider this – there are over 15,000 BOSS kits out there in Australia alone. That’s 30,000 air bags. I sell replacement bags at a rate of about 4 bags per month. That tells us the bags are lasting a very long time and just not wearing out. Of course they can and they save heaps. Sometimes they just need new top brackets. We talk with farmers, tradies and travelers every day about their load carrying and air system needs and we take pride in making our mark on Australia. We have been doing air suspension for over 15 years and have over 20,000 Aussie customers out there running BOSS air suspension products. Over the years we make improvements where we can and so by now we have become a market leader recognised for having the best product at the best prices. BOSS also have a development center in Canada looking after our Canadian and American interests. We have a lot of exciting vehicle applications in the USA that eventually filter through to Australia and other parts of the world and so we have a very extensive range which includes all the American pick ups as well as the old classic cars like Chev and Buick. At BOSS we dont copy others – To begin with we dont trust the others to get it right. But more importantly the others dont have anything to copy. BOSS are the first to get hold of new vehicle models and get kits to market having tried and tested them, fully getting to understand the vehicle and the engineering required. As such BOSS have the widest range of applications for Australian and USA markets and we are onto all the new models even before they are released. Also other brands seem content with drilling chassis rails. Sure it means less kits fit more vehicles but no one wants to compromise their vehicle so we put in that extra bit of attention and the results are in the bag. BOSS have the most comprehensively wide range of accessories as well. All of our air compressors can be rebuilt and we stock those parts. We have tanks, pressure switches, water filters, braided lines, digital pressure gauges, everything for in car operation of your bags, the list goes on and on. BOSS air bags are manufactured in our BOSS factory with our own machines to our own exacting standards and specifications. We strongly believe it’s the only way of maintaining strict control over the bags. Here are some interesting facts… It takes over 20 minutes for each bag to go from the raw un-cured blended rubber to a cured air bag. 1 machine can only make 1 bag at a time. Its not just the thickness of the rubber that gives the bag its strength but also the angle of the reinforcing cords and design of the woven beads. The proprietary ballistic material used for the woven reinforcing on the airbag wall, along with the specific spacing and angle of the weave, is what gives our air bag its unique strength. The bead ring ends of the bag are constructed of 4 Hi-tensile cords at each end, ensuring that the top and bottom hold their shape and cant be pulled away from the Aluminium clamping ring. The center of the air bag (the part of the bag with the most stress) is constructed using 9 strands of Hi-Tensile steel to form an indestructible center support. Our competitors’s bags have less than half these strands. The BOSS airbag machines are operated at over 400psi while the curing process is taking place with very high heat. There’s an internal bladder pushing the airbag case into the mould ensuring consistency throughout the airbag wall. Each air bag machine has over 50 tons of clamping pressure on the mold during curing. Effectively these are desperately over engineered as there’s no way you could ever exert over 50t and 400 psi on a bag in your vehicle. The factory tests selected bags to destruction within a controlled chamber to ensure continued bag quality and identify possible ways to constantly improve the design and technique. We have just recently released the exciting new EX-2 Bags. They have a 5 year leak free guarantee. Tooling was modified to provide for a heavier and wider rim width. BEWARE: Some other brands use crimped-on end caps. Crimped or Banded air bags are prone to popping the end caps out at anything over 100psi and often simply pull the end caps out when the bag is fully extended. BOSS air bags are undeniably the strongest in the automotive industry and exceed any other air bag brands by nearly double. Here are some handy links to short videos for tips on preparing your bags and air lines… Cutting air lines square.. Bolting up the brackets.. Ver 100 different air bag leaf and coil load assist kits. BOSS does coil replacements kits. BOSS does air struts. BOSS does full air suspension systems. BOSS does package deals with different in cab and compressor options. BOSS does Coil O. Ver struts with coils. BOSS does Shock Absorbers. And of course, BOSS does air suspension for Harley Davidson bikes… So you see BOSS is 100% focussed and committed to delivering all the best gear. Here is a selection of our other popular accessories and add ons. 3 Litre Alloy Tank. 6 Litre Alloy Tank. 9 Litre Alloy Tank. 15 Litre Alloy Tank. Our big PX07 Compressor. PX07 Compressor in a kit. PX07 In Cab Control for air bags. PX06 Compressor and Tank Combo. PX02 In Cab Control for air bags. PX06 and PX02 Wiring Kit. DIY Air Bag Controls. Digital Air system display. Manual Air system display. Twin needle air pressure gauge. Gaugue and air down buttons. Gauge on its own in a panel. Braided Line 1.5m. Braided Line 1.5m & Check Valve. Braided Line 700mm & Check Valve. Pressure Switch 70-100 psi. Pressure Switch 110-135 psi. Pressure Switch 110-150 psi. Pressure Switch 150-180 psi. Blow Off Relief Valve 200psi. One Way Check Valve. Mini Regulator with Gauge. Water Trap / Filter. Diff / Transmission Breather Kit. 100% Duty H/D Relay. Remote Nitto Kit for Tyre inflation point. 1/4 Brass Bung Stopper. 3/8 Brass Bung Stopper. 10m x 1/4 Poly Air Line. 10m x 3/8 Poly Air Line. 10m x 1/2 Poly Air Line. Air Horns with Compressor & Tank. Offroad Articulation Kit for air bag transfer. Air Bag spacer plates. Like we said, no one else offers such a huge list of optional bits. Ride like a BOSS. The item “LA09 Toyota Hilux 2WD 2015 & 2016 models BOSS Air Bag Load Assist Kit Suspension” is in sale since Wednesday, January 13, 2016. This item is in the category “Vehicle Parts & Accessories\Car, Truck Parts\Suspension, Steering\Other”. The seller is “bossproducts” and is located in Labrador, QLD. This item can be shipped worldwide.
- Brand: BOSS
- Manufacturer Part Number: BOSS LA09 Hilux 2WD 2015 onwards
PREMIUM SUSPENSION AND CHASSIS BRAND. New Suspension & Chassis Kit Toyota Camry Built in USA Models ONLY!!! This is a Brand New Front Complete Spring Struts, Lower Control Arm, Lower Ball Joints, Sway Bar Links, Inner and Outer Tie Rods than will fit the following Toyota’s Years and Models. Will NOT FIT HYBRID MODELS!! STOP & Check your info Built in USA ONLY!!! N Should start with a 1 or 2, Check your info. Check Vehicle for Compatibility. 1 x Part # 1331582L 11741 Front Left Spring Strut 1 x Part # 1331582R 11742 Front Right Spring Strut 2 x Part # K750123 Front Left & Right Sway Bar Stabilizer Links 1 x Part # CMS86181 Drivers Side Lower Control Arm & Bushing With Ball Joint 1 x Part # CMS86182 Passengers Side Lower Control Arm & Bushing With Ball Joint 1 x Part # ES80602 P/S Outer Tie Rod 1 x Part # ES80603 D/S Inner Tie Rod 2 x Part # EV800085 Inner Tie rods. Your satisfaction is very important to us. Buyers pay for reshipping charges and will not be reimbursed less stated otherwise. Items must be in original package with all original contents. Sell Smarter with Kyozou. Inventory and Ecommerce Management. The item “New Suspension & Chassis Kit Toyota Camry Built in USA Models ONLY! 2007-2011″ is in sale since Wednesday, November 05, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts”. The seller is “autopartsmaverick” and is located in Port Chester, New York. This item can be shipped to United States.
- Brand: PREMIUM SUSPENSION AND CHASSIS BRAND
- Manufacturer Part Number: 1331582L 1331582R CMS86181 CMS86182
- Interchange Part Number: ES80602 ES80603 EV800085 K500044 K500043
- Other Part Number: Toyota OE 4806906150 4806806150
- Placement on Vehicle: Left
- Surface Finish: NEW
29 years at the same location. If we do not have it, we can build it. The item “Any TOYOTA Front & Rear Air Suspension Kit all components shown most models” is in sale since Sunday, September 07, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lower Kits & Parts”. The seller is “chassis_tech” and is located in Mesa, Arizona. This item can be shipped worldwide.
- Manufacturer Part Number: 77733
- Placement on Vehicle: Front
- Warranty: Yes
- Brand: Chassis Tech
- Package QTY: 1
- Country of Origin: US
- UPC: 729199777332
With heavy-duty components and a high-clearance design, this kit offers aggressive looks, unparalleled off-road performance, and enough ride height to run up to 32×10.50in tires. Instantly gain a meaner lifted and level stance with high-quality equipment that’s made to handle the hazards of high-performance while withstanding the test of time. A set of durable lifted knuckles, high-clearance front and rear crossmembers, upper strut spacers, Skid Plate, and long-lasting, fabricated rear blocks give you plenty of lift and uncompromised toughness. Installation time is aprox 6-8 hours. Front: Lifted knuckles, front and rear crossmembers, upper strut spacers, steering stops, brake line brackets, skid plates, differential drop brackets, bumpstop brackets, sway-bar relocation brackets, and lower skid plate. Rear: Fabricated lift blocks, u-bolts, carrier bearing shims, shock brackets, brake line brackets and a pair of N2.0 Performance series shocks. Notes: Does NOT fit XSP-X models. Minor cutting and drilling is required. Requires aftermarket wheels Clears 32×10.5 tire with proper offset wheels. Benefits: Easy bolt-on Installation Unmatched ground clearance due to high clearance crossmember design. 100% precision laser cut materials using latest Computer aided design process. No strut disassembly or strut compressor required for installation. Fits 4wd models and 2wd Pre-Runner 6-lug models. Fabricated blocks are stronger and offer a longer lifespan than cast blocks. Many other Jeep Tires, Wheels, Suspension Lifts, Performance Products and much more available. Will not fit T/X Baja or XSP-X models. Will not fit 5-lug 2wd models. The item “2005-2015 Toyota Tacoma 4 Suspension Kit (Fits 4wd and 2wd PreRunner models)” is in sale since Monday, June 13, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts”. The seller is “grandcanyon4x4″ and is located in Cave Creek, Arizona. This item can be shipped to United States.
- Manufacturer Part Number: 746.20
- Warranty: Lifetime
- Brand: Rough Country
- Kit or Single Part: Kit